Instruction manual

HOW TO CLEAN & DESCALE
Follow the instructions below for cleaning:
1. Unplug unit from the electrical outlet.
2. Allow the kettle and base to cool completely before cleaning.
3. Clean the inside of the kettle with a soft, non-abrasive sponge or brush. Use
a damp cloth to clean the outside of the unit.
4. Wipe body dry with a soft dishcloth.
¾ Do not use abrasive cleaners or scouring pads.
¾ Do not immerse the kettle, base, cord or plug in water at any time.
Follow the Instructions below for descaling:
Lime scale build-up is a common problem, particularly in areas of hard water. In
order to extend the life and maintain maximum performance of the kettle, it is
important to descale it regularly.
1. Fill the kettle half way with water and boil.
2. After boiling, add about one cup of white vinegar to the boiled water. Let the
mixture soak in the kettle overnight or for at least six hours. You do NOT
need to boil the solution. Soaking should be sufficient.
3. Empty the kettle and rinse the inside thoroughly with clean water.
4. After rinsing, fill the kettle with clean water and bring to a boil.
5. Empty water and rinse with clean water.
6. If scale is still present in kettle, repeat this process.
7. To descale the filter, remove it from kettle and soak it in diluted vinegar for a
few hours. Then rinse thoroughly with clean water. Repeat if necessary.
Note:
• You can also descale the kettle with a propriety descaling fluid.
Please follow all instructions on descaling products carefully.
CAUTION:
• NEVER immerse the kettle or base in water or any liquid.
• Kettle, filter, and base are NOT dishwasher-safe.
• Do not use abrasive cleaners or scouring pads.
6