Data Sheet

The ARRI L-Series is a wide-ranging
family of LED Fresnels that provides
today’s gaffers and lighting designers
with the versatility and quality they
require in modern lighting fixtures.
As with the other L-Series lights,
the L10 comes in three versions:
the L10-C (Color), L10-TT (Tungsten
Tuneable) and L10-DT (Daylight Tuneable). While the L10-C is the most versatile with
regard to color tuneability, producing vivid colors with saturation control, the L10-TT
and L10-DT are brighter than the L10-C and still offer a select CCT tuning range.
The L10 is the brightest and largest L-Series lamphead to date. Its substantial
10” Fresnel lens and powerful output allow for more distant fixture placement and
the wrapping of light around objects in a natural and pleasing way. At more than
twice the brightness of the L7, the L10 is also one of the brightest LED Fresnels on
the market.
Consuming only 400 watts, the L10 is incredibly energy efficient. The L10-TT and DT
versions have a brightness level close to that of a 2,000-watt tungsten Fresnel. This
means that with the same amount of power as consumed by a single conventional 2 kW tungsten light, you can run five L10s and achieve
almost five times the light output.
Tuneable Daylight
allows for fine-
tuning of the
daylight color temperature from 5,000 K
to 6,500 K with increased brightness
over the L10-C, and is particularly
suited to applications requiring precise
matching to daylight balanced light
sources.
Tuneable Tungsten
allows for fine-
tuning of the
tungsten color temperature from 2,600 K
to 3,600 K with increased brightness over
the L10-C, and is particularly suited to
applications requiring precise matching
to conventional tungsten lampheads.
Bright. Robust. Tuneable.
LIGHTING Product Information | February 2015
Color temperature,
tint and hue can be
continuously adjusted from 2,800 K to
10,000 K, between full plus or minus
green and RGBW colors.
5 % brighter than L10-C 10 % brighter than L10-C
Order No. Description
L0.0003383 L10-C, Hanging, Blue/Silver
L0.0003384 L10-C, Hanging, Black
L0.0003385 L10-C, Pole Operated, Blue/Silver
L0.0003386 L10-C, Pole Operated, Black
L0.0003382
L10-C, Stand-Mount, Blue/Silver,
3 m Cable, Schuko PowerCon
L0.0003381
L10-C, Stand-Mount, Blue/Silver,
7 m Cable, Edison PowerCon
Order No. Description
L0.0003389 L10-TT, Hanging, Blue/Silver
L0.0003390 L10-TT, Hanging, Black
L0.0003391 L10-TT, Pole Operated, Blue/Silver
L0.0003392 L10-TT, Pole Operated, Black
L0.0003388
L10-TT, Stand-Mount, Blue/Silver,
3 m Cable, Schuko PowerCon
L0.0003387
L10-TT, Stand-Mount, Blue/Silver,
7 m Cable, Edison PowerCon
Order No. Description
L0.0003395 L10-DT, Hanging, Blue/Silver
L0.0003396 L10-DT, Hanging, Black
L0.0003397 L10-DT, Pole Operated, Blue/Silver
L0.0003398 L10-DT, Pole Operated, Black
L0.0003394
L10-DT, Stand-Mount, Blue/Silver,
3 m Cable, Schuko PowerCon
L0.0003393
L10-DT, Stand-Mount, Blue/Silver,
7 m Cable, Edison PowerCon
This ARRI L-Series Product Information (Ident.-No.: 80.0006457) is published by Arnold & Richter Cine Technik, February 2015 © ARRI/2015
Technical data and offerings are subject to change without notice. All rights reserved. Without any warranty. Not binding 02/2015. ARRI is a registered trademark of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
ARNOLD & RICHTER CINE TECHNIK · TÜRKENSTRASSE 89 · D-80799 MUNICH · PHONE [phone] · FAX [phone] · www.arri.com
STAND-MOUNT versions include the following base configuration:
28 mm Spigot (Junior Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.
POLE-OPERATED versions include the following base configuration:
Pole Operation for Pan, Tilt and Focus, 28 mm Spigot (Junior Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.
HANGING versions include the following base configuration:
28 mm Spigot (Junior Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.