Group Projection HDTV Instruction Manual

4.4.4 Command Line Interface Syntax

Frames on a disc recorder can be accessed by the

alexpose command as files, using the protocol-like

filename convention:

‘dr://<host name>/<partition name>/<clip

name>/<frame number>‘

e.g.

‘dr://mydiscrecorder/PART1/testclip/42‘

means frame 42 within the clip testclip. Frame

enumerations starts with frame 0.

Omitting the clip name addresses the complete

partition, e.g.

‘dr://mydiscrecorder/PART1/500‘

Note: This is a name convention built in the CLIF and

ALGUI software, not a protocol. Therefore, no

extra drives have to be installed to use this

feature.

Although the DVS software allows the creation

of partition and clip names containing ‘/‘ or

‘\‘, these will not work. The reserved clip

name ‘.‘ (a single dot) shall also be avoided.

Conguration

4.4.4.