Full Product Manual

Setting Up a Wireless Network Connection

Wireless Router SURFboard® SBR-AC1750 • User Guide

2. Press and hold the

WPS

button located on the SBR-AC1750 rear panel for five to 10 seconds

and then release (see

Rear Panel

for the SBR-AC1750 rear view).

Figure 21 – SBR-AC1750 WPS Pairing Button

3. If applicable, press the

WPS

button on your WPS-enabled computer or other WPS device.

4. Repeat step 3 for each additional WPS-enabled wireless device that you want to connect to

your wireless network.

Test Your Wireless Network Connection

Perform the following connectivity test to check that your SBR-AC1750 and other wireless

devices are connected to your wireless home network:

1. If the wireless devices successfully connected to the wireless network, disconnect the

Ethernet cable from your computer and SBR-AC1750.

2. Open a web browser on your computer.

3. Type the default wireless router URL,

http://192.168.0.1, in the address bar and then

press

Enter.

If the website did not open, please call

ARRIS Technical Support

for assistance.