Full Product Manual

Configuring Your Wireless Network

Wireless Router SURFboard® SBR-AC1750 • User Guide

6. Enter a custom name for your wireless network in the

Wireless Network Name (SSID

) field or

keep the default network name currently displayed in the SSID (Service Set Identifier) field

which is also listed on your router label.

The wireless network name must be different from any other network name on your home

network. You can use any combination of letters (lowercase and uppercase), numbers,

and/or special characters (symbols); 32 characters maximum.

7. Enter any combination of letters, numbers, and/or special characters for your network

password in the

Password (PSK)

field.

8. Checkmark

Show Password

if you want to make your password visible.

9. When done, click

Apply

Set Up WPS on Your Wireless Network

Wi-Fi Protected Setup (WPS) is the standard network security method to easily add WPS-enabled

wireless devices to your wireless home network. You can use either the Personal Information

Number (PIN) or Pushbutton Configuration (PBC) method to easily set up and connect your

WPS-enabled wireless devices.

1. Log in to the SBR-AC1750 Web Manager and then click

Basic

on the SBR-AC1750 Main Menu

bar.

2. Click

WPS Settings

from the Basic submenu options.

Figure 31 – Basic WPS Settings Screen

3. Select

2.4 GHz

5 GHz

for the wireless frequency range of your wireless network.

4. Select the

Wi-Fi Protected Setup (WPS) Enable

checkbox to turn ON WPS on your home

network.

Note

: Uncheck

Wi-Fi Protected Setup (WPS) Enable

to turn OFF WPS.