User Guide

Chapter 4: Battery installation and removal

PN 365-095-32810 x.2 SBV3202 DOCSIS® 3.0 Telephony Modem for Xfinity® Customers User Guide

1 - Battery Slots

2 - Battery Guides

3 - Battery Pull Strap

Note: Batteries will not insert completely into the SBV3202 if not oriented correctly. The

battery should slide into the bay without significant force. Line up the slots in the battery

bay with the guides on the battery and apply even pressure on both ends of the battery.

WRONG

RIGHT

4. Push the battery pack into the bay until it latches into place.

If you are taking the battery out of the SBV3202, use the battery pull strap to dislodge

the battery.

Note: The SBV3202 will not begin operating until you apply AC power.

5. Replace the door:

a. Place the tabs of the battery door into the slot inside the SBV3202 battery

compartment.

b. Rotate the door toward the front of the SBV3202 until the latch snaps back into

place.

1 - Battery Compartment

2 - Hinge Tabs

3 - Receiver Slots