User Guide
Chapter 4: Battery installation and removal
PN 365-095-32810 x.2 SBV3202 DOCSIS® 3.0 Telephony Modem for Xfinity® Customers User Guide
© 2018 ARRIS Enterprises, LLC. All rights reserved. 20
6. To remove the battery, grasp the battery and pull back on the latch at the front of the
battery.
7. Gently rock the battery out of the bay.
Note: The SBV3202 uses a Lithium-Ion battery pack. Please recycle or dispose of the battery
responsibly and in accordance with local ordinances, see Caring for the environment by
recycling your ARRIS equipment page 7) for more information.
Battery usage and storage conditions
The life expectancy of your battery should be several years, provided that it was
purchased from an approved source.
Your battery goes through a calibration procedure when it is first installed or replaced.
This procedure can take up to 72 hours to complete and is repeated every six months.
If your battery becomes fully drained during a power outage, the calibration procedure
will need to be repeated.
The battery should be installed in your SBV3202 and kept there at all times.
Do not store the battery separately from the SBV3202 for any prolonged period of time.
Battery disposal guidelines
To ensure compliance with current and future rechargeable battery take-back laws, ARRIS
has joined Call2Recycle, a collection program for rechargeable batteries throughout North
America. US and Canadian customers should visit www.call2recycle.org to properly recycle
your lithium-ion battery backup units (BBUs).