User Guide

Chapter 5: Install and connect your telephony modem
PN 365-095-32810 x.2 SBV3202 DOCSIS® 3.0 Telephony Modem for Xfinity® Customers User Guide
© 2018 ARRIS Enterprises, LLC. All rights reserved. 25
2. Drill holes through the template in the specified locations for the mounting screws. After
drilling holes, remove the template from the service.
3. If using drywall anchors, set them into the wall. Then, drive the screws into the wall
leaving a gap of about 1/8” (3 mm) between the screw head and the wall. If not using
anchors, just drive the screws.
4. Slip both mounting slots in the back of the SBV3202 over the screws, then slide the case
down until the narrow end of the keyhole slot contacts the screw shaft.