Quick Guide / User Information Please read this manual carefully before you use this unit, and keep it well for further checking.
(Important) FCC Verification NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Introduction .......................................................................... 5 Brief Introduction ........................................................................ 5 Screen Icons .............................................................................. 5 Getting Started ..................................................................... 6 Micro SD Card ........................................................................... 7 Charging ...................................
Self-timer / photo mode ............................................................ 20 Interval / Photo mode ............................................................... 20 Image sequence ...................................................................... 20 White balance .......................................................................... 20 Digital Effect ............................................................................. 21 AE ISO....................................................
Introduction Brief Introduction Power/Record/Photo Zoom in/ Fast backward/ Volume +/UP OK/Playback Mode/Return Lense Speaker LED indicator Zoom out/ Fast forward/ Volume -/Down USB | HDMI LED indicator Microphone MicroSD card slot Screen Icons 12 3 4 56 78 1 2 3 4 UL 12 9 5 6 7 13 10 11 8 9 10 11 12 13 Mute recording Recording mode Recording resolution Remaining time of memory (in recording, it will show recorded time) Motion detection symbol Cycle recording symbol Current storage memory
Getting Started Install batteries Charging Connect the USB cable to camera USB port, insert the charger to socket and wait for 2-3 hours. During charging, the LED is yellow. When power full, the LED light will turn off automatic. Insert Micro SD Card Hold the camera; make sure buttons are upward; confirm the Micro SD Card direction and the side with words towards to display screen; Push Micro SD Card into card slot gently, and pay attention to the directions.
Micro SD Card Select Micro SD Card The memory maximum up to 32 GB. 1 GB can store 7-30 minutes video. For more information about image and quality please refer to details below. Minimum memory 8GB is recommended, 16GB or 32GB will be better for full HD recording. To ensure the card transfer speed, we highly recommend using a class 4 or higher card.
Button Definitions [Power /Record/Photo] Power on: press this button and hold it down for 2 seconds to power on. Power off: in preview mode, press this button and hold it down for 2 seconds. Record: in record mode, press this button, it will start recording. Stop Recording: when recording, press this button to stop. Photo: in photo mode, press this button to take a photo. Snapshot: during play backing, press to take a snapshot.
Exit menu In setting mode, press to exit. File protect In recording, press to protect this video file. This file will not be erased by normal cycle recording. [<>/-/ ] Digital zoom While in recording mode, no matter preview or recording mode, press [<>/-/ ] to zoom no zoom function for 1920*1280 and 1280*720@50 resolution. Photo zoom In photo mode, press [<>/-/ ] to zoom out.
How to Record and Take a Photo? How to record? Record After the camera is powered on, press power button to start. The red LED is blinking now. Quick Record Before the camera is powered on, hold the power button for 2 seconds, it will power on and start recording. The red LED is blinking now. *This function need to set up in the menu. 1 *About the rec LED, you can turn it off in the menu. 2 How to take a photo? After the camera is powered on, you can press [mode] button to switch to photo mode.
Record Quality Resolution and quality decide the capacity of recording. Please read it carefully. Video quality Resolution L M H 4007kbps 6270kbps 8334kbps (30 min/GB) (20 min/GB) (15 min/GB) 8109kbps 10284kbps 12361kbps (15 min/GB) (11 min/GB) (9min/GB) 720p 1080p Photo quality Photo quality Photo resolution Size 3.5M 2560 x 1440 900 photos/GB 3M 2403 x 1296 1000 photos/GB 2M 1920 x 1080 1500 photos/GB 0.
Install in your car Speed limit It will protect you from overspeeding. This function needs to work with GPS for speed test. When the real speed is beyond what you set in the menu, the GPS coordinator stamp will hide in the video. The default is 120KPK.you can change it with 5KPH interval. Anti-glare Turn on this function at night, it can help you to see the car license plate clearer in front of you. 5 easy recording modes Auto/Sunny/Rainy/Snowy/Night, choose the most suitable mode in different situation.
Basic operations How to make it? 1. Use your computer to create a “.txt” in your SD card a) Make a new folder [SYS] under the root of your SD card. b) Make a new.txt file under folder [SYS]. c) Input your car plate No. d) Choose “save as…”, and select Code to be [UNICODE] e) Name it “ID”. 2. Insert this SD card into your device Power on the device, the device will update and show your “car plate no” in the video now. How to turn it off? In the menu, choose [Car ID] to [OFF].
File protection 1. How to protect it? a) From G-Sensor If the G-Sensor detected movement, it will start recording and protect this video file. There will be [L] on the screen. This video will not be erased by normal cycle recording. b) Manual During recording, press [Mode/Return] button, your file will be locked from being deleted. 2. How to delete protected video a) On device select the storage to be [internal memory], choose [format]; b) On computer select video files and choose [delete] from computer.
Mute recording If you don't want to record your voice, just press the [OK] Button. There will be a mute icon on the screen. It will stop to record any sound now. How to use the GPS player? Installation 1) Connect it to computer via a USB cable. 2) Find the player .rar, copy it to your computer. 3) Decompress player .rar, double click to open the player (Refer to Pic1).
Add video a. Press to add video folder (Refer to Pic2) b.
Settings Video settings 01/04 RESOLUTION REC SCENE QUALITY ANTI-GLARE SPLIT MODE OK SET 1920X1080P30 AUTO H OFF 5 MIN. MODE EXIT Resolution You can choose among 1920×1080P30, 1920×1080P25, 1280×720P60, 1280×720P50, 1280×720P30, 1280×720P25, 848×480P60, 848×480P50, and 320 × 240P120. Between 30fps and 25fps, which one should I choose? If you have PAL TV system in your country, please set it in 30fps. Please select 25fps if your country TV system is NTSC. Then the frames will be smooth in your local system.
Quality You can choose among H, M, L. For bitrate information, please check below. Resolution 1920×1080P30|25 1280×720P30|25 848×480P65|50 320×240P120 Quality H M L H M L H M L H M L Bitrate Mbit/s 12 10 8 8 6 4 8 6 4 8 6 4 Anti-glare To see the car plate of the front car much clearer, try to turn it on. Split mode This is to set the file segment, so it will be much easier to share the file or upload. You can choose among 1min/5min/10min/15min/30min/45min/OFF.
Please note if you turn on the [Record Loop], then [split mode] will not work. RECORD LOOP NO VIDEO ROTATION NO PHOTO SIZE CAPTURE SCENE SELF CAPTURE OK SET 5M AUTO AUTO MODE EXIT Record loop This is to set the loop recording on and set each file segment. There will be no gap between different video segments. You can choose between 1min/5min/NO. The older stored files will overwrite. Video Rotation Choose between [Auto],[Yes],[No]. [Auto] means the device will rotate automatically.
Capture scene This is to set the photo scene to get better photos. You can choose among [Auto], [Sunset], [Portrait], [Landscape], [Sports], [Night], [Spotlight], [Water], [Sand Snow]. Self-timer / photo mode Here is a time for the self-timer can be set. To switch on, choose between 5, 10, 20, 30 or 60 seconds. If you press the record button, it will automatically take a picture after this time. Interval / Photo mode You can choose between 1, 2, 5, 10, 30, 60 seconds and OFF.
Digital Effect To get a different style of your video, try the digital effects. You can choose Art, Sepia, Negative, Black & White, Vivid, OFF. AE ISO Change the ISO for photos and videos. You can choose among 100, 200, 400, 800, 1600 and Auto. For photos, if you set a higher ISO, the shutter will be faster. It is useful in dark circumstance. For videos, please just leave [Auto], otherwise you may get strange videos. AE BIAS This is to set the EV level of the video.
Motion detection Turn on, the device will record the object movement, last one minute. G-sensor This is to change the sensitivity of the G-sensor. You can choose from 1 to 6 and OFF. 1 means it is very sensitive. Normal setting for G-Sensor can be 3 GPS switch This is to turn ON/OFF the GPS. It will affect the GPS icon on the screen. If your device doesn't have GPS, please put this option to OFF. NOTE: PLEASE NOTE THAT THE CABLE WITH GPS MODULE MUST BE INSERTED IN THE CAR CHARGER.
System settings Car ID Input your car plate number into video. Please refer to page [Car plate stamp] for operation. 01/03 CAR ID ON QUICK RECORD OFF CAR MODE STORAGE SELECT GPS OSD OK SET ON INTERNAL CARD GPS/SPEED MODE EXIT QUICK RECORD You can choose between ON and OFF. The record will start automatically after switch on the camera. Car mode You can choose ON and OFF. If ON, when you connect this device to car power via a car adaptor, it will power on the device and start recording.
02/03 TIME STAMP ON REC LED ON LCD OFF OFF POWER OFF MICROPHONE OK SET 3 MIN. ON MODE EXIT Time Stamp You choose ON and OFF. If it is ON, it will date in Month/Date/Year mode and time on the video. REC LED You can choose between ON and OFF. If you set ON, the LED on frontside will flash while recording. LCD OFF The screen will enter into power-save mode after the set time. You can choose between 30sec, 1min, 2min, 3min, 5min, and OFF.
03/03 VOLUME 2 FLICKER 50HZ TV TYPE TIME AND DATE FORMAT OK SET NTSC 18.12.2012 11:07 NO MODE EXIT Volume You can turn the beep volume from 1 to 3 and OFF. [3] means maximum. Flicker It is a setting of your light frequency. Choose between 60Hz and 50Hz. TV type If you want to watch video on TV, select the right TV type between NTSC and PAL. In Germany select PAL, pls. Time and date Set the correct time and date of your device.
DEFAULT SETTING FIRMWARE LANGUAGE OK SET NO 107AB165/21207 ENGLISH MODE EXIT Default setting This will restore all of the settings to factory default. If you find strange thing happen, try this. Firmware It tells the firmware version and product information. Better to help your check the quality problems. Languages Change between different languages.
Accessories What’s in the package? Window mount Camera Car Charger GPS-Cable with integrated GPS module USB_Cable User Manual 27
Specification Chipset Ambarella A2S70 Image Sensor 1/2.7“ 2.1M Sensor Video Resolution 1920x1080 (30/25fps) | 1280x720 (60/50fps) | WVGA (60/50fps) | QVGA (120fps) Video Record Format .mp4 Photo Resolution 0,9 MB /2 MB /3 MB /3,5 MB Photo Record Format .JPG Lens Specs F/NO=2.8 f=2.8 Lens Angle 140° Lens Digital Zoom Yes LCD Size Ca. 3,8 cm / 1.5” LCD Resolution 480 x 240 G-Sensor Yes GPS (Int./Ext.
FAQ Q：It won't turn on! A: Try turning it on and off again. Has the camera been left on/recording for a while? Is it charged? If not, check out “You got the Power: Charging the Battery”. Also, try to charge from a computer's USB socket. Q: I can't play back footage on my computer. A: Try using a different program, such as KMPLAYER Media Player. It works with a huge range of operating systems. You may need to drag and drop the file onto the KMPLAYER window if the default file association isn't right.
Guarantee Please keep the proof of purchase for this device for the entire duration of the guarantee period, as it must be produced in the event of any claim. You (as the end user) receive a 36-month guarantee from the date of sale. The article has been manufactured using the most modern production methods and subjected to strict quality controls. Please contact only the manufacturer (not the dealer where you purchased it) in the event of any defects during the guarantee period.
