Instructions / Assembly

13
Step 1: Continued
Next, insert the Upper/Lower Chord Truss
Assembly into the Truss Post Assembly as
shown. Secure with Small Bolts and Nuts. Do
not tighten at this time. Repeat for other side.
5
6
Attach Truss Splice to Truss using Small Bolts
and Nuts as shown below, but do not tighten at
this time. Temporarily secure the peak of the
Truss using two Small Bolts and Nuts as shown.
13H
Repeat for Additional Trusses
You will need for this page:
(QTY: 14)
(QTY: 12)
Assemblies from previous page:
• Truss Post Assembly (2)
• Chord Truss Assembly (2)
Nominal Size # of Modules # of Trusses
10’x10’ 3,0 m x 3,1 m 0 2
10’x15’ 3,0 m x 4,6 m 1 3
10’x20’ 3,0 m x 6,1 m 2 4
10’x25’ 3,0 m x 7,5m 3 5
10’x30’ 3,0 m x 9,0 m 4 6
The number of Trusses you will
need to construct your building
will depend on the size of your building. All
buildings require at least two Trusses. See the
chart to the right to determine the number of
Trusses needed for your building.
10645
Truss Splice
1
10646
Knee Brace
4
10641
10642
10643
10644
10645
10646
10646
118 1/4”
300,4 cm
7
Attach Knee Braces to
Truss using Large Screws
as shown. Do not tighten at
this time. With the Truss assembled,
check that the width of the Truss
is 118 1/4” (300,4 cm) across the
top and bottom of the Truss. If so,
tighten all fasteners. Repeat steps
to build additional Trusses.
Number of Trusses Needed
SB
SB
LS
LS
LS
LS
LS
LS
LS
LS
SB
SB
SB
SB
SB
SB
SB
LS SB