Instructions / Assembly

23
(QTY: 4+)
You will need for this page:
Step 7: Wall Angles
Starting at the middle of the building, install all
Side Wall Angles along the side of the building.
Secure overlaps with Small Bolts and Nuts fi rst,
then insert Large Screws where the Wall Angles meet
the building frame.
1
23H
(QTY: 4+)
Side Angle
4+
10625
2
Once the fi rst Side Wall Angles are in place, continue
until all Side Wall Angles are installed along the entire
length of the building. At the front and rear of the building,
secure Wall Angles with Large Screws as shown. All Side Wall
Angles overlap by 8 1/4” (21,0 cm).
(QTY: 4)
LS
LS
LS
SB
SB
8 1/4”
21,0 cm
Overlap Length
All angles overlap by 8 1/4”
(21,0 cm)
10625
10625
LS SB LS
10625
LS
10625
10’x10’ (3,0 m x 3,1 m)
building shown.
R