01CH 722750517 Owner’s Manual & Assembly Guide Model No. EZ10872HVCR EZ10872HVCRCC EZ10872HVCC EZ10872HVCCCR Gloves must be worn at all times to reduce risk of injury! www.arrowsheds.com EZ10872HVCREU EZ10872HVCRCCEU EZ10872HVCCEU EZ10872HVCCCREU 10’ x 8’ Nominal Size EZEE SHED Customer Service: 1-800-851-1085 or assist@arrowsheds.com BUILDING DIMENSIONS Approx.† Size 10’ x 8’ 3,0 m x 2,4 m Storage Area 71 Sq. Ft. 502 Cu. Ft. 2 6,6 m 14,2 m3 * See Inside for Detailed Safety Information.
GB: Assembly manual in additional languages available online. Scan QR code below to access. FR: Manuel de montage disponible en ligne dans d’autres langues. Pour y accéder, scannez le code QR ci-dessous. SP: Manual de montaje en idiomas adicionales disponible online. Escanee el código QR a continuación para acceder. DE: Montageanleitung in zusätzlichen Sprachen online verfügbar. Scannen Sie den QR-Code unten, um darauf zuzugreifen. IT: Manuale dell’assemblea in altre lingue disponibile online.
SAFETY PRECAUTIONS... 02CG Safety precautions MUST be followed at all times throughout the construction of your building! Care must be taken when handling various pieces of your building since many contain sharp edges. Please wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your building. Practice caution with the tools being used in the assembly of this building. Be especially familiar with the operation of all power tools.
ASSEMBLY TIPS & TOOLS 03A Watch the Weather Closely: Be sure the day you choose to install your building is dry and calm. Do NOT attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Use Teamwork: Two or more people are required to assemble your building. One person can hold the parts or panels in place while the other person fastens them together and handles the tools. This makes the process of assembling your building faster and safer.
04A FREQUENTLY ASKED QUESTIONS Q. How long will it take to assemble the building? A. Assembly time depends on a variety of factors, including roof design, tools available, DIY skill and the pace at which you work. Guidelines for each shed assembly are approximate AFTER completion of the base, and assume two or more people working on the assembly. Generally, you should plan on at least one day working with someone who can assist you; again, after constructing the base.
05A Q. What kind of base do I use? A. You can: •Use an Arrow Base Kit •Pour a concrete slab •Build a wood deck/floor (use exterior-grade plywood) •Use patio blocks •Build on crushed gravel, dirt or grass Arrow provides a base kit accessory that is an option for most building sizes. If you are building a wood deck/floor, an Arrow floor frame kit on top of your deck/floor assembles in minutes and provides a floor frame suitable for a 5/8” exterior-grade plywood floor (not included).
Q. What if the rear wall angle and channels are too large to fit inside of the rear wall panels? A. Check the dimensions of wall assemblies. They should be slightly smaller than the floor 06A frames. Lay the assemblies on top of the rear floor frame and pull them up to the top of the wall panels causing the corner panels to stand erect and not lean inward. Caution: Be careful to not scratch the panels on the way up. Q. The wide rib always overlaps the crimped rib. Is there ever an exception? A.
CARE & MAINTENANCE... 44A Exterior Care: For a long lasting finish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or coastal climate region. Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage.
HARDWARE LIST... 08CH Hardware Views by Key No. Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 65923 65103 65004 66646 66715 66718 66720 60H 66860 66847 66719 66713 66721 10280 Part Description Qty.
PARTS LIST... Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 11035 11034 10275 11017 11027 11024 10288 10336 11033 11037 10340 11038 11040 11030 10337 11039 11022 11041 11008 11009 11032 10999 11000 10998 11036 80123 11014 80121 11015 11019 10341 11026 11025 11031 11004 11002 11028 Part Description Qty.
ASSEMBLY BY KEY NO.
ASSEMBLY BY KEY NO.
ASSEMBLY OVERVIEW 12CH Build Side Wall Assemblies Build Rear Wall Assembly Build Front Wall Assembly Assemble Walls Build Roof Assemblies Install Gables and Roof Beam 12
ASSEMBLY OVERVIEW Install Roof Panels Install Trim Install the Door and you now have a finished shed 13 13CH
CONSTRUCTING A BASE... 14CH OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.). Allow 1 - 2 hours for construction. OPTION 2: Wood Platform If you decide to build your own base, be sure to select the appropriate materials.
Step 1: Side Walls You will need for this page: (QTY: 4) (QTY: 4) 1 10341 4 10340 4 Wall Channel Floor Channel 11019 4 Channel Splice Make two (2) Wall Channel Assemblies (Painted). 10341 11019 10341 15CH 10341 11019 10341 2 Make two (2) Floor Channel Assemblies (Unpainted). 10340 11019 10340 10340 11019 10340 3 4 Turn Channel over and insert Channel Splice. Use Tapered end to start. Use rubber mallet and gently tap Channel Splice into Channel untill mounting holes align.
Step 1: Side Walls You will need for this page: 10998 12 Panel Wall 6 10999 2 Panel Wall 11000 2 Corner Panel Make two (2) Side Wall Sections. 7 panels & 1 corner - each Be cautious when maneuvering and placing Panels. Once Panels begin to go up it is important to be able to finish in a timely manner to reduce the possibility of wind damage to your building.
Step 1: Side Walls 17CG MUST USE FLAT SOLID SURFACE. DO NOT SNAP ON GROUND OR GRASS Top Panel ALWAYS COVER THE ARROW 7 8 Raise Panel at Angle. Top Panel Bottom Panel Overlap Panels and Align Ends. maintaining pressure Always cover the Arrow. 9 10 Bottom Panel Hook Edge of Top Panel to Bottom Panel. Bring Top Panel down flat while maintaining pressure in the middle to keep edge hooked. Apply pressure in area shown 11 Start in middle of assembly to snap Panels together.
Step 1: Side Walls 18CH You will need for this page: ARROW TO TOP (QTY: 8) 14 Install Corner Panel. 15 Cover Arrow on Corner Panel. CORNER PANEL 10999 16 Use edge of surface, like your carton, to allow Corner Panel to hang down. 17 18 18 11000 Push down to snap Panels together working from the center in each direction . Attach Corner Panel to Wall Panel using four (4) washers and screws.
Step 1: Side Walls You will need for this page: 19CH IMPORTANT 2 START ASSEMBLY AT CORNER PANEL Wall Channel Assembly 19 Attach Wall Channel Assembly (Painted). CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Channel ELEVATE PANELS TO MAKE INSTALLING WALL CHANNEL ASSEMBLY EASIER 20 Align Wall Channel Assembly to Panel Ribs and pop into place at Corner. WALL CHANNEL ASSEMBLY (Painted) ARROW TO TOP ELEVATED PLATFORM 21 1.
Step 1: Side Walls You will need for this page: 2 Floor Channel Assembly 22 20CH IMPORTANT 10280 4 START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Attach Floor Channel Assembly (Unpainted). ELEVATE PANELS TO MAKE INSTALLING WALL CHANNEL ASSEMBLY EASIER Channel Corner Panel CORNER CLIP FLOOR CHANNEL ASSEMBLY (UNPAINTED) ELEVATED PLATFORM 1. Angle Floor Channel Assembly Wall Panels Channel 2.
Step 2: Rear Wall You will need for this page: (QTY: 2) 1 (QTY: 2) 11037 2 11035 2 Wall Channel Floor Channel 11019 Channel Splice Make one (1) Wall Channel Assembly (Painted). 21CH 1 1 11028 Channel Splice 11037 11028 2 Make one (1) Floor Channel Assembly (Unpainted). 3 Turn Channel over and insert Channel Splice. Use Tapered end to start.
Step 2: Rear Wall You will need for this page: (QTY: 4) 1 10998 8 10999 Panel Wall Panel Wall ARROW TO TOP 6 22CH 11000 1 Corner Panel Make one (1) Rear Wall Section. Be cautious when maneuvering and placing Panels. Once Panels begin to go up it is important to be able to finish in a timely manner to reduce the possibility of wind damage to your building. MUST USE FLAT SOLID SURFACE.
Step 2: Rear Wall You will need for this page: 23CH IMPORTANT 1 START ASSEMBLY AT CORNER PANEL Wall Channel Assembly 10 Attach Wall Channel Assembly (Painted). CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Channel ELEVATE PANELS TO MAKE INSTALLING WALL CHANNEL ASSEMBLY EASIER 11 Align Wall Channel Assembly to Panel Ribs and pop into place at Corner. WALL CHANNEL ASSEMBLY (Painted) ARROW TO TOP E L E VAT E D PLATFORM 1.
Step 2: Rear Wall You will need for this page: 1 Floor Channel Assembly 13 24CH IMPORTANT 10280 2 START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Attach Floor Channel Assembly (Unpainted). ELEVATE PANELS TO MAKE INSTALLING WALL CHANNEL ASSEMBLY EASIER Channel Corner Panel CORNER CLIP FLOOR CHANNEL ASSEMBLY (UNPAINTED) ELEVATED PLATFORM 1. Angle Floor Channel Assembly Wall Panels Channel 2.
Step 3: Front Wall You will need for this page: 11037 2 11035 2 Wall Channel Floor Channel 1 11019 1 11028 25CH 1 Channel Splice Channel Splice Make one (1) Wall Channel Assembly (Painted). 11037 11037 11028 2 Make one (1) Floor Channel Assembly (Unpainted). 11035 11019 11035 11037 11028 3 11035 Turn Channel over and insert Channel Splice. Use Tapered end to start.
Step 3: Front Wall You will need for this page: (QTY: 2) 11033 1 (QTY: 4) 26CH 11034 1 Header Trim Ramp 11037 INSERT SCREW 11028 11035 INSERT SCREW 11019 11028 11037 11019 11035 REMOVE SCREW 11037 11037 11033 Wall Channel Channel Splice Wall Channel Assembly (Painted) Header Trim Join Channels, attach Header Trim and screw together using two (2) washers and screws.
Step 3: Front Wall You will need for this page: (QTY: 2) ARROW TO TOP 11024 (QTY: 6) 2 Door Jamb 7 10998 2 Panel Wall 27CH 2 11004 11000 Corner Panel Panel Wall Make one (1) Front Wall Section. 1 MUST USE FLAT SOLID SURFACE. DO NOT SNAP ON GROUND OR GRASS. DOOR JAMB 11024 DOOR JAMB 10998 11024 11004 11004 10998 VERIFY PANELS ARE POSITIONED IN CORRECT SEQUENCE BY PART 8 Door Jambs always on top of Wall Panel.
Step 3: Front Wall You will need for this page: 1 1 Wall Channel Assembly Floor Channel Assembly 12 10280 2 28CH IMPORTANT START ASSEMBLY AT CORNER PANEL Corner Clip Channel CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Attach Wall Channel Assembly (Painted). WALL CHANNEL ASSEMBLY (Painted) CORNER CLIP FLOOR CHANNEL ASSEMBLY (UNPAINTED) 13 Attach Floor Channel Assembly (Unpainted). IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 1.
Step 3: Front Wall You will need for this page: (QTY: 4) (QTY: 4) 15 17 Secure Wall Channel Assembly (Painted) using two (2) washers and screws. 16 Secure Floor Channel Assembly (Unpainted) using two (2) screws. 29 Secure Header Trim to Wall Channel Assembly (Painted) using two (2) washers and screws. 18 Secure Ramp to Floor Channel Assembly (Unpainted) using two (2) screws.
Step 4: Right Door Assy You will need for this page: 11017 (QTY: 6) (QTY: 2) 1 1 Vertical Door Brace 11026 1 Vertical Door Brace 11025 1 Door Astragal 66715 1 Door Handle 66721 6 U-Nut (Door Clip) Attach U-Nuts onto Vertical Door Brace. U-NUT (2X) TYPICAL (3) PLACES U-NUT (2X) 11017 2 U-NUT (2X) Attach Door Handle to Vertical Door Brace using two (2) screws and Astragal using six (6) washers and screws.
Step 4: Right Door Assy You will need for this page: 11002 (QTY: 4) 1 11009 Door Panel Door Panel 1 1 11008 Door Panel 10275 2 Horizontal Door Brace 31CH 2 Vertical Door Brace Assy ARROW TO TOP 3 Overlap Door Panels, align ends and snap Panel Ribs together. MUST USE FLAT SOLID SURFACE. DO NOT SNAP ON GROUND OR GRASS Always cover the Arrows. 11008 11002 11009 4 10275 11002 5 11009 Attach Horizontal Door Braces to Door Panels.
Step 4: Right Door Assy You will need for this page: (QTY: 3) (QTY: 8) 10288 2 Diagonal Door Brace 6 Turn Door over. 7 Attach Diagonal Door Braces to Door Panels using three (3) screws. 10288 10288 8 Install four (4) washers and screws for Horizontal Door Braces. 9 Turn Door over. 10 Install four (4) washers and screws for Diagonal Door Braces.
Step 5: Left Door Assy You will need for this page: 11017 (QTY: 2) 1 Vertical Door Brace 11027 1 Vertical Door Brace 1 66721 6 U-Nut (Door Clip) 66716 1 Padlock Eyelet Attach U-Nuts onto Vertical Door Brace. U-NUT (2X) TYPICAL (3) PLACES U-NUT (2X) 11017 2 U-NUT (2X) Attach Padlock Eyelet to Vertical Door Brace using two (2) screws.
Step 5: Left Door Assy You will need for this page: 11002 (QTY: 4) 1 11009 1 Door Panel Door Panel 1 11008 Door Panel 10275 2 Horizontal Door Brace 34CH 2 Vertical Door Brace Assy ARROW TO TOP 3 Overlap Door Panels, align ends and snap Panel Ribs together. MUST USE FLAT SOLID SURFACE. DO NOT SNAP ON GROUND OR GRASS Always cover the Arrows. 11008 11002 11009 4 10275 11002 5 11009 Attach Horizontal Door Braces to Door Panels.
Step 5: Left Door Assy You will need for this page: (QTY: 8) (QTY: 7) 10288 2 66719 Diagonal Door Brace Spring Pin Upper 6 66713 1 Spring Pin Lower Turn Door over. 7 8 SPRING PIN UPPER 1 Attach Diagonal Door Braces to Door Panels using three (3) screws. Install four (4) washers and screws for Horizontal Door Braces. 10288 10288 9 10 Attach Spring Pin Upper to Door using two (2) screws. Attach Spring Pin Lower to Door using two (2) screws. 11 35CH SPRING PIN LOWER Turn Door over.
Step 6: Roof pre-assy You will need for this page: (QTY: 8) 10336 4 10337 4 Roof Channel Roof Channel 1 11019 4 Channel Splice Make four (4) Roof Channel Assemblies (Painted). 10337 11019 10336 10337 11019 10336 10337 11019 10336 10337 11019 10336 2 3 Turn Channel over and insert Channel Splice. Use Tapered end to start. Use rubber mallet and gently tap Channel Splice into Channel untill mounting holes align. 11019 11019 12" m 5c 30, 10337 4 10336 36 Join Channels and screw together.
Step 6: Roof pre-assy You will need for this page: 11038 4 (QTY: 16) Roof Beam 5 11038 Make two (2) Roof Beam Assemblies using (8) nuts and bolts for each.
Step 6: Roof pre-assy You will need for this page: 80121 2 Roof Panel Left (QTY: 8) ARROW TO TOP 6 11014 12 11015 2 Roof Panel Roof Panel Right 4 11039 Roof Channel Assembly 4 Fascia Trim MUST USE FLAT SOLID SURFACE. DO NOT SNAP ON GROUND OR GRASS Make two (2) Roof Sections. Overlap Panels and Align Ends. Snap panel ribs together. 7 HOLES Always cover the Arrows.
Step 6: Roof pre-assy You will need for this page: 2 11022 1 39CH 1 11032 Roof Beam Assembly (QTY: 14) Ridge Cap ARROW TO TOP 10 Ridge Cap Attach Roof Beam Assembly (from page. 35) to Roof Section using six (6) washers and screws. 11015 80121 ROOF BEAM ASSEMBLY 2X EDGE OF ROOF SECTION ROOF BEAM ASSEMBLY ROOF BEAM ASSEMBLY SIDE VIEW SIDE VIEW 11 EDGE OF ROOF SECTION Attach Ridge Caps to Right Roof Section using two (2) washers and screws.
Step 7: Wall Assembly You will need for this page: 1 Side Wall Assembly (QTY: 4) CORNER PANEL ON TOP OF WALL PANEL Corner Clip Corner Panel Wall Panel 40CH 1 Rear Wall Assembly 1 Attach Side Wall and Rear Wall. 2 Attach Side Wall to Rear Wall using four (4) washers and screws at corner. A IT IS HIGHLY RECOMMENDED THAT AT LEAST 2 PEOPLE ARE PART OF ASSEMBLY.
Step 7: Wall Assembly 41CH You will need for this page: 1 1 Side Wall Assembly Front Wall Assembly Install Corner Clip IT IS HIGHLY RECOMMENDED THAT AT LEAST 2 PEOPLE ARE PART OF ASSEMBLY. 3 Attach Side Wall and Front Wall.
Step 7: Wall Assembly You will need for this page: (QTY: 12) 4 Attach remaining Walls using four (4) washers and screws at each corner.
Step 8: Gable & Beam Assy You will need for this page: (QTY: 16) (QTY: 14) 1 11038 4 Roof Beam Gable Right 80123 2 Gable Left 11031 1 Header Angle Assemble Roof Beams using two (2) nuts and bolts. 1 2 11036 2 43CH 11038 Overlap Length 6” (15,2 cm) 11038 11038 92 3/4” (235,6 cm) Finished Length 11038 2 Snap Gables onto Upper Channel Attach Roof Beam Assemblies together using (10) nuts and bolts.
Step 8: Gable & Beam Assy You will need for this page: (QTY: 12) 11030 2 (QTY: 8) Gable Brace 5 11040 4 Roof Beam Bracket 44CH 1 Roof Beam Assembly Install Gable Braces using four (4) nuts and bolts in each and Roof Beam Brackets using (2) washers, nuts and bolts in each. 11030 OPEN HOLES 11040 11030 11040 11040 11040 6 44 Install Roof Beam Assemblies to Gables using (4) nuts and bolts.
Step 9: Roof Assembly You will need for this page: (QTY: 16) 1st 2nd 1 Attach Roof Sections using sixteen (16) screws through Roof BeamCenter into Roof Channels.
Step 9: Roof Assembly You will need for this page: (QTY: 32) (QTY: 12) 66860 2 Peak Cap 60H 4 46CH 66847 4 Corner Cap 2 Attach Roof Sections to building using fourteen (14) washers and screws each. 3 Place Peak Caps between Ridge Cap and Roof Sections secure using two (2) washers and screws each. Vent 66860 66860 11022 4 Attach Corner Caps and Vents to building using twelve (12) screws.
Step 9: Roof Assembly You will need for this page: (QTY: 8) 5 Attach Roof Beam Assembly to Roof Beam Bracket using two (2) nuts and bolts each .
Step 9: Roof Assembly You will need for this page: 11041 (QTY: 12) 6 2 Roof Beam Brace 11051 48CH 4 Roof Beam Brace Attach Roof Beam Brace to Roof Beam Bracket and Roof Beam Assembly using two (2) nuts and bolts each. 7 Attach Roof Beam Brace to Gable Brace and Roof Beam-Center using two (2) nuts and bolts each . ROOF BEAM BRACKET 11051 NOTE: FLANGE ON ROOF BEAM BRACE LOCATED BETWEEN ROOF BEAM-CENTER AT FOURTH (4) HOLE FROM END.
Step 10: Door Assembly You will need for this page: 66718 6 (QTY: 12 11053 2 INSIDE OF BUILDING Door Jamb Support Hinge 11053 DOOR JAMB 1 Attach three (3) Hinges and (1) Door Jamb Support to each Door Jamb using two nuts and bolts in each hinge.
Step 10: Door Assembly You will need for this page: 1 (QTY: 14) Right Door Assembly 2 1 Left Door Assembly Attach Right Door Assembly and Left Door Assembly to Hinges using two (2) screws in each hinge. 3 50 Secure Ramp to Floor Channel Assembly (Unpainted) using two (2) screws.
ARROW ACCESSORIES... 49CG ANCHOR KITS FLOOR FRAME KITS Anchor Kit contains heavy-duty steel augers, 60' (18 m) of steel cable and 4 cable clamps. No digging or concrete pouring, just insert cable under roof, over roof beams, into augers and twist augers into the ground. For buildings MODELS FB47410, FB5465, FB106-A, FB109-A, FB1014-A, FBSDS108, and FKEZEE A simple floor frame system made of heavy-duty, hot-dipped galvanized steel. Use as base for plywood, sand or stone. Model No.
ANCHORING OPTIONS... 50CG IMPORTANT: It is important that building be anchored after construction. these are recommended ways of anchoring. Anchor into Wood or Concrete Arrow Anchoring Kit: (Model No. AK100 or 68383) For wood platform. Use Decking Screws. For concrete slab. Use Lag Screws. Recommended for use with the concrete base. Contains: Corner gussets, perimeter clips, hardware, 1/4" masonry drill bit and installation instructions. Arrow Anchoring Kit: (Model No.
ASSEMBLY NOTES 53 46A
ASSEMBLY NOTES 54 46A