Instructions / Assembly

4
WARNING:
Risk of electrical shock.
Turn o power at the
breaker panel.
Switch o the main electrical
supply from the fuse
box/circuit breaker before
installing the unit or doing any
maintenance.
Do not use outdoor.
AVERTISSEMENT :
Risque de choc
électrique. Couper le
courant sur le panneau
électrique.
Il est important de couper
le courant sur le panneau
électrique avant de procéder à
l’installation ou à l’entretien.
Ne pas utiliser à l’extérieur.
ADVERTENCIA:
Riesgo de descarga
eléctrica. Desconectar
la corriente eléctrica del
panel (disyuntor).
Desconecte la instalación
eléctrica en la caja de
circuitos/disyuntor antes de
instalar esta unidad o realizar
tareas de mantenimiento en
ella.
No usar en exteriores.
IMPORTANT
The installer and/or user must
read, understand and follow
these instructions before
installing the product. This
product must be properly
installed before it is used. If
instructions are not followed,
the manufacturer will not
be held responsible for
any problems or product
malfunctions. Failure to follow
installation and/or operating
instructions will the warranty.
We recommend that this
product be installed by a
certied electrician. In some
states or provinces, it is legally
required that for this type
of product be installed by a
certied electrician, according
to the electrical and building
codes eective in the region
where the unit is being used.
IMPORTANT
Avant l’installation de ce
produit, l’utilisateu ou
l’installateur doit avoir lu et
compris ces instructions.
Cet appareil doit être installé
convenablement avant usage.
Si ces instructions ne sont pas
respectées, le fabricant ne
pourra être tenu responsable
d’aucun problème ou
dysfonctionnement du produit.
Le non-respect des instructions
d’installation et d’utilisation
annulera la garantie en vigueur.
Nous recommandons que
ce produit soit installé par
un électricien certié. Dans
certains États ou certaines
provinces, la loi exige que ce
type de produit soit installé
par un électricien certié
conformément aux codes de
l’électricité et du bâtiment en
vigueur.
IMPORTANTE
El instalador o usuario debe
leer, entender y seguir estas
instrucciones antes de instalar
el producto. El producto
debe estar correctamente
instalado antes de su
utilización. Si no se siguen las
instrucciones, el fabricante
no se hará responsable
de ningún problema o mal
funcionamiento del producto. Si
no se siguen las instrucciones
de instalación o de uso, se
anulará la garantía.
Le recomendamos que el
producto sea instalado por
un electricista certicado. En
algunos estados o provincias,
se requiere por ley que este
tipo de producto sea conectado
por un electricista certicado
siguiendo los códigos eléctricos
y arquitectónicos de la región.
WARNING
ATTENTION
ATENCIÓN