Operating instructions

3.
artisanu
TORO-3000, TORO-3200 and TORO-4000
Extra Heavy Duty Cylinder Bed Lockstitch Compound
Needle Feed Walking Foot Stitching Machines.
CAUTION…..
READ BEFORE OPERATING
THIS MACHINE...
1. Lubricate the Stitcher before operating!
2. Confirm you are plugging the electric motor
into the correct rated voltage.
3. Confirm the machine and motor are turning
over in a counter-clockwise rotation.
4. Your Artisan TORO machine is normally set up
with an SR-2 speed reducer/transmission to
controll your stitching speeds and to add
additional torque to drive the needle into heavy
leathers and fabrics at slow operating speeds.
5. After operating the machine for more than 25
days, if desired, the top stitching speed may
be increased to a maximum speed of 800 spm.
6. Keep your hands and all clothing away from
the machine when pushing the button to turn
the electric motor on.
7. Switch on the Servo Motor and check for the
LED light to illuminate.
8. Always switch off the motor when finished
sewing. Never leave the motor running
while away from the machine.
9. Always switch off the motor before changing
needles or adjusting the sewing machine.
10. The machine is a fine tool, not a toy. Do not
let children operate the sewing machine.
SPECIFICATIONS
USAGE
Saddle Stitching, Tack, Shoes,
Boots, Saddle Bags, Harness.
NEEDLE
Schmetz 794 D or 794 S for
Leather. For fabric 794
SEWING SPEEDS
Normal up to 600 spm.
Max. 800 spm.
NEEDLE DIAMETER
# 110 to 250
# 18 to 27
STITCH LENGTH
0 to 11 mm
THREAD
Z-69 to 415
# 00 to # 6 cord
PRESSER FOOT LIFT
By Hand Lifter 15 mm
By Foot Lifter 25 mm
STITCH ADGUSTING
Sliding Lever with Reverse
THREAD TAKE-UP
SYSTEM
Cam type thread take-up lever
LUBRICATION
Manual Lubrication with
Sewing Machine Oil
NEEDLE BAR
STROKE
56 mm
MOTOR
Electronic Servo.
TORO-3200