Manual

ARZUM

• To make the brewing process easily, remove

the drip cap. Fill your teapot with water

suitable for the amount of tea you want to

brew from the tap of the samovar and place

it again.

• Place the drip cap on its specially designed

area to prevent it from moving. Thanks to the

drip cap, the water ﬂowing from the tap or

overﬂowing from the glass is prevented from

pouring onto the counter.

• If the water level has dropped below the minimum level, water will not

ﬂow from the tap. In this case, you can add water in your kettle. Your

kettle will automatically switch to boiling water position upon detecting

that the water is cooling down.

• When you do not want to operate your

appliance, you can turn off your appliance by

pressing the on / off switch.

NOTE: When you take the teapot to ﬁll tea

pull and take off its base from the settled

surface. Thus, the drops that accumulate on

the base will pour into the kettle.

WATER HEATING

• You can also use your Arzum Ehlikeyf Samover for water heating and

boiling when necessary.

• To do this, ﬁll the

kettle reservoir

with water between

the maximum and

minimum levels, as

in tea preparation.

Place the empty

teapot on the

top lid and start

your appliance by

pressing the on/off button.

• Your appliance will switch to energy saving after boiling the water in a

short time. If your kettle is left running in this way, your hot water will

always be ready.

• Even if you add cold water, it will automatically switch to the boiling