- Asant Technologies Mini MAU Installation Guide

Mini MAU Page 7
Installation Mini MAU
The installation of an Asanté Mini MAU is
very simple:
1
Locate the AUI port on the
device.
The AUI is on the rear of your
hub or computer. Externally it
consists of the 15 pin AUI con-
nector.
2 Connect the Mini MAU to the
AUI port.
3
Connect the Ethernet cable to
the Mini MAU.
Twisted-pair cable (10BaseT) with
Mini MAU
Connect the 10BaseT Mini
MAU to the device’s AUI port.
Plug one end of the cable into
the 10BaseT port on the Mini
MAU.
minimau Page 7 Monday, August 26, 1996 11:02 AM