THANK YOU! FOR PURCHASING YOUR NEW STUDIO BASS COMBO REGISTER ONLINE Please register this product online so we can make sure we give you years of customer support through our friendly in-house service centre. Here is where you need to visit to register your product: http://www.ashdownmusic.com/pages/register WWW.ASHDOWNMUSIC.
ASHDOWN ENGINEERING - STUDIO RANGE USER GUIDE INTRODUCTION The all-new designs feature a new light-weight design using responsibly sourced poplar-ply wood, providing a light but strong structure for our new combo enclosures. Today people require our products to be portable yet practical, which in essence is a task of its own. When designing our new studio line we discussed a number of different ideas, but the key point what they needed to sound as good as they look...
ASHDOWN ENGINEERING - STUDIO JNR USER GUIDE FEATURES 1. Input - a 1/4” Jack Socket for use with your instrument 2. Volume - A rotary control to adjust the overall output of the amp. 8. 3. Bass - A rotary control to adjust the amount of Bass (freq) +/- 15dB. On - light indicates the amplifier is powered. 9. Power Switch - Turn your amp on or off 4. Middle - A rotary control to adjust the amount of Middle (freq) +/- 15dB. 5.
ASHDOWN ENGINEERING - STUDIO JNR 10.
ASHDOWN ENGINEERING - STUDIO 8 USER GUIDE FEATURES 1. Input - a 1/4” Jack Socket for use with your instrument 7. 2. Volume - A rotary control to adjust the overall output of the amp. Line In - For use with a line level instrument or audio device such as an MP3 player 8. 3. Bass - A rotary control to adjust the amount of Bass (freq) +/- 15dB. On - light indicates the amplifier is powered. 9. 4. Middle - A rotary control to adjust the amount of Middle (freq) +/- 15dB.
ASHDOWN ENGINEERING - STUDIO 8 10. IEC Power input - a fused IEC power inlet for use with the supplied cable 11. Power Switch - Turn your amp on or off 12.
ASHDOWN ENGINEERING - STUDIO 10 USER GUIDE FEATURES 1. On - light indicates the amplifier is powered. 10. Volume - A rotary control to adjust the 2. Shape - A switchable pre-shape EQ. 3. Pre-Gain - A rotary control to set the input sensitivity of the amp in conjunction with your instrument. 11. Headphones - 1/4” Headphone Jack Output (this actively mutes the speaker for silent practice). 4. Drive - A rotary control to adjust the amount of tube emulated overdrive. 12.
ASHDOWN ENGINEERING - STUDIO 10 15. Power Switch - Turn your amp on or off 16.
ASHDOWN ENGINEERING - STUDIO 12 1 2 3 4 5 6 7 USER GUIDE 8 9 10 11 12 13 STUDIO 12 17 16 15 14 FEATURES 1. On - light indicates the amplifier is powered. 10. Volume - A rotary control to adjust the overall output of the amp. 2. Shape - A switchable pre-shape EQ. 11. 3. Pre-Gain - A rotary control to set the input sensitivity of the amp in conjunction with your instrument. FX Loop - a TSR Jack is provided for use with a Y cable (tip send ring return). 12.
ASHDOWN ENGINEERING - STUDIO 12 19 18. Power Switch - Turn your amp on or off 19.
ASHDOWN ENGINEERING - STUDIO 15 1 FEATURES 2 3 4 5 6 7 USER GUIDE 8 17 16 9 10 11 15 12 13 14 1. On - light indicates the amplifier is powered. 10. Volume - A rotary control to adjust the overall output of the amp. 2. Shape - A switchable pre-shape EQ. 11. 3. Pre-Gain - A rotary control to set the input sensitivity of the amp in conjunction with your instrument. FX Loop - a TSR Jack is provided for use with a Y cable (tip send ring return). 12. Di - A balanced XLR Di Output. 13.
ASHDOWN ENGINEERING - STUDIO 15 USER GUIDE 20 19 19. IEC Power input - a fused IEC power inlet for use with the supplied cable 20.
ASHDOWN ENGINEERING - STUDIO RANGE SPECIFICATION: Studio Jnr Output Power Speaker Unit Input Impedance Input Signal Range E.Q. Dimensions Weight 15watts rms into 8 ohms 1 x 6” Ashdown Driver 1 Meg ohm 100Mv to 10v Passive Bass, Middle, Treble. H: W: D: 6Kgs 13.1Lbs Studio 8 Output Power Speaker Unit Input Impedance Input Signal Range E.Q. Dimensions Weight 30watts rms into 8 ohms 1 x 8” Ashdown Driver 1 Meg ohm 100Mv to 10v Passive Bass, Middle, Treble. H: W: D: 6.1Kgs 13.
ASHDOWN ENGINEERING - STUDIO RANGE Studio 12 Output Power Speaker Unit Input Impedance Input Signal Range E.Q. Dimensions Weight 100watts rms into 8 ohms 1 x 12” Ashdown Driver 1 Meg ohm 100Mv to 10v Bass, Hi-Mid, Middle, Lo-Mid, Treble H: W: D: 10.3Kgs 22.7Lbs Studio 15 Output Power Speaker Unit Input Impedance Input Signal Range E.Q. Dimensions Weight 300watts rms into 8 ohms 1 x 15” Ashdown Driver & Tweeter 1 Meg ohm 100Mv to 10v Bass, Hi-Mid, Middle, Lo-Mid, Treble H: W: D: 11.