User Manual

ASHDOWN ENGINEERING - STUDIO 10
USER GUIDE
FEATURES
1. On - light indicates the amplier is
powered.
2. Shape - A switchable pre-shape EQ.
3. Pre-Gain - A rotary control to set
the input sensitivity of the amp in
conjunction with your instrument.
4. Drive - A rotary control to adjust the
amount of tube emulated overdrive.
5. Bass - A rotary control to adjust the
amount of Bass (freq) +/- 15dB.
6. Lo-Mid - A rotary control to adjust the
amount of Lo-Mid (freq) +/- 15dB.
7. Middle - A rotary control to adjust the
amount of Middle (freq) +/- 15dB.
8. Hi-Mid - A rotary control to adjust the
amount of Hi-Mid (freq) +/- 15dB.
9. Treble - A rotary control to adjust the
amount of Treble (freq) +/- 15dB.
10. Volume - A rotary control to adjust the
overall output of the amp.
11. Headphones - 1/4” Headphone Jack
Output (this actively mutes the speaker for
silent practice).
12. Line In - For use with a line level instrument
or audio device such as an MP3 player
13. Passive/Active - A -15dB input pad for use
with active instruments
14. Input - a 1/4” Jack Socket for use with your
instrument