User Manual

SAFETY SIGNAL WORDS

Note the use of the signal words DANGER, WARNING and CAUTION with the safety mes-

sages. The appropriate signal word for each has been selected using the following guide-

lines:

DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in

death or serious injury. This signal word is to be limited to the most extreme situa-

tions typically for machine components which, for functional purposes, cannot be

guarded.

WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in

death or serious injury, and includes hazards that are exposed when guards are

removed. It may also be used to alert against unsafe practices.

CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in

minor or moderate injury. It may also be used to alert against unsafe practices.

GENERAL SAFETY GUIDELINES

Safety of the operator is one of the main concerns in designing and developing a new piece

of equipment. Designers and manufacturers build in as many safety features as possible.

However, every year many accidents occur which could have been avoided by a few sec-

onds of thought and a more careful approach to handling equipment. You, the operator,

can avoid many accidents by observing the following precautions in this section. To avoid

personal injury, study the following precautions and insist those working with you, or for

you, follow them.

Replace any CAUTION, WARNING, DANGER or instruction safety decal that is not readable

or is missing. Location of such decals is indicated in this booklet.

Do not attempt to operate this equipment under the influence of drugs or alcohol.

Review the safety instructions with all users annually.

This equipment is dangerous to children and persons unfamiliar with its operation. The

operator should be a responsible adult familiar with farm machinery and trained in this

equipment’s operations. Do not allow persons to operate or assemble this unit

until they have read this manual and have developed a thorough understanding

of the safety precautions and of how it works.

To prevent injury or death, use a tractor equipped with a Roll Over Protective System

(ROPS). Do not paint over, remove or deface any safety signs or warning decals on your

equipment. Observe all safety signs and practice the instructions on them.

Never exceed the limits of a piece of machinery. If its ability to do a job, or to do so safely,

is in question - DON’T TRY IT.