User`s guide

Basic Menu

FIGURE 16

Basic menu

Contrast

The contrast controls the degree of difference between the lightest

and darkest parts of the picture. Adjusting the contrast changes

the amount of black and white in the image.

1 Use the up and down arrows to highlight Contrast, press

Select, use the arrows to adjust the contrast from 0 to 100 in

the slider bar, then press

Select to accept your changes.

Brightness

Adjusting the brightness changes the intensity of the image.

1 Use the up and down arrows to highlight Brightness, press

Select, use the arrows to adjust the brightness from 0 to 100 in

the slider bar, then press

Select to accept your changes.

NOTE: The color setting applies

to video sources only.

Color

The color setting adjusts a video image from black and white to

fully saturated color.

1 Use the up and down arrows to highlight Color, press

Select, use the arrows to adjust the color from 0 to 100 in the

slider bar, then press

Select to accept your changes.

White Level

White Level increases the brightness of whites that are near 100%.

The default is 100% for computer sources and 20% for video

sources. Changes are saved per source when the projector is pow-

ered down.

M2+.book Page 21 Thursday, April 8, 2004 8:10 AM

Downloaded From projector-manual.com ASK Manuals