User`s guide

Using the Projector

System menu

Turn the features in the System menu on and off by highlighting

them and pressing

Select. A checkmark in the box indicates the

feature is on; an empty box means the feature is off.

FIGURE 18

System menu

• Rear: This reverses the image so you can project from behind a

translucent screen.

• SourceSearch: When this feature is on, the projector automati-

cally searches for an active source. When it is off, you must

press the

Source/Select button on the keypad or Computer and

Video buttons on the remote to switch among sources.

• Hide OSD: This hides the on-screen display (OSD) of the adjust-

ment bars that appear when you adjust things using the key-

pad, such as volume. It does not hide the menu’s adjustment

bars.

• DPMS enable: This turns the Display Power Management Sys-

tem (DPMS) on. When it is on, the projector turns the lamp off

after 3 minutes of not detecting an active source. The projector

will return to normal activity immediately if it detects an active

source. After 5 additional minutes, the projector turns off. You

must press the

Power button to turn the projector back on. The

LED blinks green when in DPMS mode.

M2+.book Page 24 Thursday, April 8, 2004 8:10 AM

Downloaded From projector-manual.com ASK Manuals