User`s guide

iv
Safety Instructions
•
Caution: Don’t set liquids on the projector. Spilled liquids may
damage your projector.
• Caution: Don’t place the projector on a hot surface or in direct
sunlight.
• Caution: Do not drop the projector. Transport the projector in
an approved case; see page 37 for a list of cases.
Important Operating Considerations for Safety
•
Place the projector in a horizontal position no greater than 15
degrees off axis.
• Locate the projector in a well-ventilated area without any
obstructions to intake or exhaust vents. Do not place the projec-
tor on a tablecloth or other soft covering that may block the
vents.
• Locate the projector at least 4' (1.2 m) away from any heating or
cooling vents.
• Refer to this manual for proper startup and shutdown proce-
dures.
• In the unlikely event of the lamp rupturing, discard any edible
items placed in the surrounding area and thoroughly clean the
area along all sides of the projector. Wash hands after cleaning
the area and handling the ruptured lamp. This product has a
lamp which contains a very small amount of mercury. Dispose
of it as required by local, state or federal ordinances and regula-
tions. For more information see
www.eiae.org.
Follow these instructions to help ensure image quality and lamp
life over the life of the projector. Failure to follow these instruc-
tions may affect the warranty. For complete details of the war-
ranty, see the Warranty section at the end of this user's guide.
Do not place objects in
this area on the back of the projector
2
f
t
(
.
6
m
)
M2+.book Page iv Thursday, April 8, 2004 8:10 AM
Downloaded From projector-manual.com ASK Manuals