User manual

5151
5151
51
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Onboard SATA Controller
SATA Operation Mode
SATA IDE Combined Mode
eSATA Mode
SATA1
SATA2
SATA3
SATA4
SATA5
eSATA
[Enabled]
[IDE]
[Enabled]
[Gen2]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Configure onboard
serial ATA
controller.
3.4.43.4.4
3.4.43.4.4
3.4.4
Storage ConfigurationStorage Configuration
Storage ConfigurationStorage Configuration
Storage Configuration
Onboard SATA Controller
Use this item to enable or disable the “Onboard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. Configuration options: [AHCI], [RAID] and [IDE].
AMD AHCI BIOS ROM
Use this item to enable or disable AMD AHCI BIOS ROM. This option appears
only when you set “SATA Operation Mode” to [AHCI]. The default value is
[Disabled].
SATA IDE Combined Mode
This item is for SATA5 and eSATA ports only. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATA5 and eSATA ports, please
disable this item.
eSATA Mode
Use this item to select eSATA mode. Configuration mode: [Auto] and [Gen2].
The default value is [Gen2]. If you use SATA Gen3, please select [Auto].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA5 port.