User manual

• Move to the LONGITUDE item (CD) and enter your value. In order to know it, consult an atlas or a map,

which shows the exact longitude. (1)

For a fixed setting, LATITUDE and LONGITUDE are optional information, it allows exact calculation of the

Azimuth and Elevation for each satellite, In case of motorized system those data are very important for

automatic satellite location (LocSat function).

• Move to the LOCAL DATE item (CD) and enter it using the digital keys on your remote control.

• Move to the LOCAL TIME item (CD) and enter it using the digital keys on your remote control.

You need to set the time and date each time you unplug the receiver from the mains, otherwise the Program

guide will not work properly.

• Move to the MENUS LANGUAGE item (CD) and choose using CH+/CH- keys, the OSG languages.

• Move to the AUDIO LANGUAGE item (CD) and choose using CH+/CH- keys, the audio carrier by

default. (2)(3).

• Press OK to confirm your choices and go back to the previous menu.

N.B: You can leave this menu without saving the modificaitons by pressing ESC on your remote control.

(1) If you do not know this value, leave this field free.

(2) It does not mean that every program will be in the selected language but the default one if available.

(3) While watching a TV program you can select a different language pressing the LANG key on the remote

control.

5. Installation

5.1 Installation with a fix antenna

• Press MENU on your remote control.

• Select INSTALLATION (CD) and press OK to confirm.

• Select ANTENNAS AND SATELLITES PARAMETERS (CD) and press OK to confirm.

• Move the cursor to INSTALLATION TYPE(CD) and select <<INDIVIDUALLY FIXED>> by pressing

CH+/CH-.

• Move to NUMBER OF ANTENNAS (CD) and select the numbers of LNBs or antennas in accordance

with your installation by pressing CH+/CH- ( a maximum of 4 antennas or 4 LNB are allowed).

In case of multiple reception points installation (multi-switch SMATV or IF to IF type) your LNB might be

externally powered then :

• Move to LNB POWER SUPPLY (CD) and select YES using CH+/CH-.

• Press OK to confirm your installation type, number of antennas or LNB of your outdoor setting.

A new screen will appear. In this new menu, you should select which satellites you want to receive.

• Select the satellite(s) using (CD) you want to receiver and confirm the selection by using CH+/CH- (YES

should be displayed for each selected satellite). On the right window you can see the parameters

(Direction, Azimuth, Elevation etc..... ) for each selected satellite for information purposes.