Specifications

Advanced Settings
21
Setting Item Default Value Setting Details
Center Small Allows you to specify the size of the center
speaker and surround speakers. Specify the size
in accordance with the smallest cone diameter in
the system.
"Small": When the cone diameter is less than
6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than
6-1/2 inches (16 cm)
"None": When the corresponding speaker is not
used.
⿠
The setting cannot be selected "Large" if
"Front" is set to "Small".
Surround Small Allows you to specify the size of the center
speaker and surround speakers. Specify the size
in accordance with the smallest cone diameter in
the system.
"Small": When the cone diameter is less than
6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than
6-1/2 inches (16 cm)
"None": When the corresponding speaker is not
used.
⿠
The setting cannot be selected "Large" if
"Front" is set to "Small".
Crossover 100 Hz Allows you to set the lowest frequency range for
each speaker output, and make the subwoofer
output the lower frequency range than the set
value. Specify the size in accordance with the
smallest cone diameter in the system.
"40 Hz", "50 Hz", "60 Hz": For cone diameters
greater than 8 inches (20 cm)
"70 Hz", "80 Hz" "90 Hz": For cone diameters
6-1/2 to 8 inches (16 to 20 cm)
"100 Hz": For cone diameters 5-1/4 to 6-1/2
inches (13 to 16 cm)
"120 Hz": For cone diameters 3-1/2 to 5-1/2
inches (9 to 13 cm)
"150 Hz", "200 Hz": For cone diameters less than
3-1/2 inches (9 cm)
Setting Item Default Value Setting Details
Double Bass Off This function boosts bass output by feeding bass
sounds from the front left and right, and center
speakers to the subwoofer.
"On": To boost the bass output
"Off": Not to boost the bass output
⿠
The setting is fixed to "Off" if "Subwoofer" is
set to "No" and "Front" is set to "Small".
⿠
In the following cases, the settings for "Sp Config" cannot be changed:
㽎
Headphones are connected.
㽎
"Audio TV Out" is set to "On".
㽎
“HDMI CEC (RIHD)” is set to “On” and you’re listening through your TV speakers.
6. Sp Distance (Speaker Distance)
Allows you to set the distance from each speaker to the listening position. Settings are
automatically configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring
settings.
"Feet": When setting in feet (0.1 ft to 30.0 ft, in
increments of 1.0 ft)
"meters": When setting in meters (0.03 m to 9.00
m, in increments of 0.03 m)
Front Left 12.0 ft/3.60 m Specify the distance between each speaker and
the listening position.
Center 12.0 ft/3.60 m Specify the distance between each speaker and
the listening position.
Front Right 12.0 ft/3.60 m Specify the distance between each speaker and
the listening position.
Surround Right 7.0 ft/2.10 m Specify the distance between each speaker and
the listening position.
Surround Left 7.0 ft/2.10 m Specify the distance between each speaker and
the listening position.
Subwoofer 12.0 ft/3.60 m Specify the distance between each speaker and
the listening position.
⿠
In the following cases, the settings for "Sp Distance" cannot be changed:
㽎
Headphones are connected.
㽎
"Audio TV Out" is set to "On".
㽎
Speakers for which "Sp Config" are set to "No" or "None".
㽎
"HDMI CEC (RIHD)" is set to "On" and you’re listening through your TV speakers.
⿠
Default values vary depending on the regions.