Product Description

Article No.: 52SL-WCP
 Double wireless charging pad fitted with two strong magnets for attaching to a metal surface.
 Four holes at each corner for permanent fixture to non-metallic surface or wall
 Supplied with USB-C charging cable and 5V 2A charging adaptor
 With 5V 1A USB output
 If required, either place the charging pad on a metallic surface using the magnets (on underside) to hold it
in position or permanently fix it to a non-metallic surface or wall using the four 5mm diameter counter bored
holes in each corner.
 Connect charging base to wall socket using the cable and plug supplied. Turn on the power source and the
LED on the top surface of the pad will light green indicating that the USB charging output is able to be used.
 Place front face of light onto the front face of charging pad ensuring alignment of charging pads and
magnets.
 The LED on the top surface of the pad will light red indicating that the USB charging output socket is not
able to be used.
 Once the light indicates fully charged, remove from charging pad and disconnect pad power supply.
 Keep the charging pad clean by wiping with a slightly damp cloth.
 Store charging pad in a dry childproof are.
 To reduce the risk of electric shock, burns or fire
 Do not attempt to open, disassemble, modify or service the charging pad
 Do not crush, puncture, or dispose of in fire or water
Input voltage:
5V 2A
Output (Wireless):
5V 1A
Output (USB):
5V 1A
Product Description:
Specifications:
Maintenance:
Made in China
Operation:
Warning: