User manual
Method 2: Using a modied Windows
®
7 ISO
Load USB 3.0 drivers and install Windows
®
7 using a modied Windows
®
7 installation DVD.
Requirement:
• 1 x ASUS support DVD
• 1 x Windows
®
7 installation source
• 1 x Working system (PC or notebook)
• 1 x SATA ODD
1. On your working system, create an ISO image le of the Windows
®
7 installation
source using a third‑party ISO software.
2. Copy both “Auto_Unattend.xml” and “Auto_Unattend” folder from the root directory of
the ASUS supporting DVD to your system.
3. Edit the ISO le and add both “Auto_Unattend.xml” and “Auto_Unattend” folder into the
ISO le.
4. Burn this ISO le onto an empty DVD to create a modied Windows
®
7 installation
DVD.
5. Insert the modied Windows
®
7 installation DVD into an ODD on your 100 series
platform.
6. Power on your system and press F8 during POST (Power‑On Self Test) to enter the
boot screen.
7. Select the ODD as the boot device.
8. The USB 3.0 driver will be loaded automatically during installation startup.
The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly.
9. Follow the onscreen instructions to complete the Windows
®
7 installation.
2‑50 Chapter 2: BIOS information