Sonic Studio User Manual
DE157 First Edition October 2014 Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
1 English Contents Sonic Studio..................................................................................... 4 1.1 Launching Sonic Studio...................................................... 4 1.2 Sonic Studio overview.........................................................
English 1 Sonic Studio 1.1 Launching Sonic Studio After finishing the driver installation for your audio device and rebooting your computer, you will find the Sonic Studio icon on the System Tray at the bottom right-hand corner of the screen. Double-click this icon to open Sonic Studio. If the icon is not available on the System Tray, go to the Windows® Control Panel and double-click the Sonic Studio icon. 1.
English No Item Description 1 Display Displays signal meters. 2 Playback Volume Control Drag this slider to increase or decrease playback volume. 3 Recording Volume Control Drag this slider to increase or decrease record volume. 4 Analog Playback Channel Click to select appropriate analog playback channels. 5 Sample Rate Click to select sample rate and bit rate. 6 Preset The preset manager allows users to customize settings based on preference. You can create, save, and delete presets.
English No 6 Item Description 11 Output Device Select Click to select output source: analog speakers, headphones, Line out or S/PDIF device. Right-click an output source to set as the default device. 12 Input Device Select Click to select input source: MIC in, Line in or Aux in Right-click an input source to set as the default device. 13 Information Click to view driver information. 14 EQ Drag slider to adjust gains for each different frequency band.
English No Item Description 19 Virtual Surround • Click to enable Virtual Surround. • Click the individual speakers to test their positioning. 20 Reverb Gain Drag slider to adjust Reverb Gain to values between -6 to +6 dB. 21 Reverb Presets Click to select a reverb preset. 22 On/Off Reverb Gain Click to turn on/off reverb. 23 Noise Gate • Click to enable Noise Gate. • Drag the slider to remove the noise between words and sentences during voice communication.
English 8 Sonic Studio User Manual