User Guide

ASUS A7N266 User’s Manual 17
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
WARNING! Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To avoid damaging them due to static electricity,
follow these precautions whenever you work on your computer.
1. Unplug the computer when working on the internal components.
2. Use a grounded wrist strap or touch a safely grounded object or to a metal
object, such as the power supply case, before handling computer components.
3. Hold components by the edges and try not to touch the IC chips on them.
4. Whenever you uninstall any component, place the components on a grounded
antistatic pad or in the bag that came with the components.
5. Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals, and/or components.
3.4 Motherboard Settings
This section tells you how to change motherboard function settings through the
switches and/or jumpers.
A7N266
0 10 10 1
®
A7N266 Onboard LED
PLED
WARNING
ON
Incorrect
AGP Card
OFF
Correct
AGP Card
ON
Standby
Power
OFF
Powered
Off
1) Onboard System Indicators (LED - Light Emitting Diodes)
The GREEN onboard LED indicates that the system power is okay. This light
also lights when the PC is in suspend or soft-off mode. The RED onboard LED
lights up only if the wrong type of AGP card is connected to the board: (See
AGP Pro, p. 32)