User Manual

ASUS A7S266-VM/U2 Motherboard 2-19
2.4.3 PCI Configuration
Onboard MIDI I/O [Disabled]
This field allows you to select the I/O address for the MIDI port. Configuration
options: [Disabled] [330H-331H] [300H-301H]
Slot 1, Slot 2, Slot 3, Slot 4 IRQ [Auto]
These fields assign the IRQ for each PCI slot. The default setting for each field is
[Auto], which utilizes auto-routing to determine IRQ assignments. Configuration
options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video cards,
may not show colors properly. Setting this field to [Enabled] corrects this problem.
If you are using standard VGA cards, leave this field to the default setting
[Disabled]. Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave this field to the default setting [32] for best performance and stability.
Primary VGA BIOS [PCI VGA Card]
This field allows you to select the primary graphics card or the onboard VGA. The
option [Onboard VGA] appears only if you installed a PCI or AGP card.
Configuration options: [PCI VGA Card] [Onboard VGA]
USB 1.1 Controller [Enabled]
This field allows you to enable or disable the USB 1.1 controller. Configuration
options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
This field allows you to enable or disable the USB 2.0 controller. Configuration
options: [Disabled] [Enabled]
USB PM Capability Pointer [Disabled]
This field allows you to enable or disable the USB PM capability pointer.
Configuration options: [Disabled] [Enabled]