AP140R-E1 Intel® Pentium® 4 1U AP140R-E1 ASUSPRO 140R-E1
1) 2) Intel Xeon Pentium Windows MS-DOS Intel Microsoft ©2005 AP140R-E1 V2.
.......................................................................................................... 8 .......................................................................................................... 8 .......................................................................................................... 9 .................................................................... 10 .......................................................... 1-1 1.1 ............................................
2.6 2.6.1 2.6.2 2.7 2.8 2.8.1 2.8.2 ................................................................................................... 2-18 PCI .......................................................................... 2-18 .................................................................................. 2-20 ............................................................................................... 2-22 ....................................................................................... 2-23 ....
.2.6 ................................................................................................ 5-6 ........................................................................................ 5-6 Main Menu .......................................................................... 5-7 5.2.7 5.3 5.3.1 Primary IDE Master ....................................................................... 5-8 5.3.2 Primary IDE Slave ....................................................................... 5-11 5.3.
.2.2 Intel 6300ESB RAID 6.3.1 Intel 6.4.1 ............................................................................... 6-40 ATI RAGE XL ................................................... 6-40 6.3 6.4 A.1 A.1.1 A.1.2 A.2 A.3 6 ......................................... 6-27 ............................................................................... 6-34 ............................................................ 6-34 ........................................................................
IC AP140R-E1 7
UPS IC 8
AP140R-E1 1. AP140R-E1 2. step-by-step AP140R-E1 3. 4. PSCH-LR Jumper 5. BIOS BIOS BIOS 6. 7.
1. http://tw.asus.com 2.
AP140R-E1
1.
1.2 AP140R-E1 1U Socket 478 Intel® Pentium® 4 Threading Technology LAN VGA I/O I/O AP140R-E1 PSCH-LR Hyper- 1U (AR13) PSCH-LR ¤ Intel E7210 Memory Controller Hub MCH Intel¤ 6300ESB I/O Controller Hub ICH5 Intel¤ Pentium 4 Hyper-Threading L2 512K L3 1M L2 1M 800/533MHz 4 184-pin PC3200/PC2700/ 2100 unbuffered ECC non-ECC DDR 4GB LAN2 Intel¤ 82547GI Gigabit LAN CSA 1/F LAN1 Intel¤ 82541GI Gigabit LAN 32-bit ATI RAGE-XL PCI-based VGA 2 64-bit/66MHz 3V PCI-X 1 5.25 52X 2 3.5 AI2 2 3.5 SATA AA2 USB 2.
1.3 AP140R-E1 1U Socket 478 Intel® Pentium® 4 Hyper-Threading Technology L2 512K L3 1M L2 1M 800/533MHz 4 PC3200/PC2700/PC2100 DDR 4 GB Gigabit 8MB ATI RAGE-XL VGA 2 64Bit /66MHz PCI-X AP140R-E1 Microsoft Windows® 2003 Server Windows® 2000 Server Windows® 2000 Advance Server RedHat Linux® 9.0 SuSE Linux® 8.2 Novell Netware 6.
1.4 AP140R-E1 LED Location USB AI2 USB AA2 1.5 AP140R-E1 2 AP140R-E1 1 2 3 4 5 6 1. PCI 2. PS/2 3. PS/2 4. COM1 5. 6. RJ45 Gigabit LAN 1 ( ) RJ45 Gigabit LAN 2 ( ) AP140R-E1 7 8 9 10 11 12 7. USB2.0 8. Location 9. Location 10. 11. 12.
1.6 LED LED 1.6.
1.6.
1.7 AP140R-E1 CPU PCI-X AI2 2 3 1 4 11 5 6 8 7 1. 2. 3. PCI-X 4. PCI-X 5. CPU 6. 7. 8. 9. 10. 11. PSCH-LR PCIX2 PCIX1 1 2 10 9 AA2 2 3 1 1. 2. 3. PCI-X PCIX2 4. PCI-X PCIX1 4 5 11 6 7 5. CPU 6. 7. 8. 1 9. 2 12 8 1-8 9 10 10. 11. PSCH-LR 12.
AP140R-E1
2.1 AP140R-E1 1. 2. 3. 4. 5.
2.2 AP140R-E1 2.2.1 1. 2. 3. 4.
2.2.2 1. 2.
3. 4.
2.3 CPU 2.3.1 ZIF PSCH-LR Pentium® 4 478 512KB 1M L2 800/533 MHz execution trace cache 6.4GB Hyper-Threading Technology Intel® Pentium ® 4 ® PSCH-LR Gold Arrow PSCH-LR Socket 478 Pentium¤ 4 Intel Hyper-Threading 2-6 1. Intel Pentium 4 2. Hyper-Threading Hyper-Threading 3. Hyper-Threading Hyper-Threading BIOS www.intel.
Hyper-Threading 1. 2. Hyper-Threading BIOS CPU Configuration Enabled Intel Pentium 4 Advanced Menu Hyper-Threading Function Hyper-Threading 3. 2.3.2 CPU AP140R-E1 Intel® Pentium¤ 4 CPU CPU 1. 2.
2.3.3 Pentium ¤ 4 1. Socket 478 90 - 100 2. Socket-478 90 3. Pentium 4 4. Pentium 4 Pentium 4 Socket-478 5.
2.3.4 CPU CPU 1. CPU CPU 2. 3.
2.4 2.4.1 DDR DIMM Double Data Rate 4GB 184-pin unbuffered ECC non-ECC PC3200/2700/2100 DDR DIMM DIMM_A1 DIMM_A2 DIMM_B1 ® DIMM_B2 104 Pins 80 Pins PSCH-LR PSCH-LR 184-Pin DDR DIMM Sockets DDR DIMM DDR 1 1GB 2-10 4GB 3.
2.4.2 128, 256, 512MB 1GB DDR DIMM 1.
2.4.3 DDR DIMM 1. 2. DDR 3. DDR 2.4.4 1. 2.
2.5 2.5.1 IDE AP140R-E1 AI2 1. 2. 3.
4. 5. 40-pin IDE 4-pin 40-pin IDE 4-pin IDE 6. 1 IDE 7.
2.5.2 SATA AP140R-E1 AI2 SATA 1. 2.5.1 1~4 IDE 2. 7-pin SATA SATA 4-pin 7-pin SATA 3. 4-pin ¥ ( ) 4-pin ( SATA 4-pin SATA ) 4-pin ¥ SATA 4-pin/15-pin SATA ( ) 4-pin ( 15-pin SATA SATA 4. 1 4-pin SATA ) 15-pin 4-pin 3 SATA 2.5.
2.5.3 AP140R-E1 AA2 SATA 1. 2. 3. 4.
5. 6.
2.6 AP140R-E1 64-bit 66MHz 3V PCI-X ASMB PCI-X 2.6.1 PCI-X 1. PCI-X PCI-X 2. PCI-X 3.
4. PCI-X PCI-X 5. PCI-X 1~2 PCI-X 6. PCI-X PCI-X PCI-X 7.
2.6.2 1. BIOS BIOS 2. IRQ 3.
INTA# PIRQB# PIRQA# PXIRQ0# PXIRQ1# PCIX slot 1 PCIX slot 2 LAN VGA INTB# — PXIRQ1# PXIRQ2# INTC# — — PXIRQ2# PXIRQ3# INTD# — — PXIRQ3# PXIRQ0# PCI IRQ AP140R-E1 IRQ IRQ 2-21
2.7 AP140R-E1 1 2 3 5 6 9 7 8 10 4 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 2-22 4-pin 12V 20-pin ATX (FAN5) ( ) ( (FAN6) (FAN2, FAN3, FAN4) (FAN1) Panel LEDs USB 2.
2.8 1. 2. 3. 4. 5. 6. 2.8.1 1. FAN2 FAN3 FAN4 FAN2/3/4/6 2. 40mm x 56mm 3. FAN4 FAN3 FAN6 FAN2 40mm x 56mm FAN6 FAN1 2.8.2 1. FAN1 3-pin 2. 40mm x 28mm 2.8.3 FAN5 1. FAN5 3-pin 2.
2.8.4 1. 2. 3. 4.
2.8.5 1. 2. 3. 4. 5.
1. 2. 3.
2.8.6 1. 2.7 2. CPU PCI DDR 3. 4.
2-28
AP140R-E1
3.1 AP140R-E1 8 3.2 1. 2. 3.
3.3 1. 1U 2. 1U 3. 4. 5. 6.
3.4 1. 2. 3.
AP140R-E1
4.1 AP140R-E1 PSCH-LR Socket 478 Intel ® Pentium ® 4 Technology L2 512K L3 1M 800/533MHz 4 2100 DDR 4 GB Gigabit 8MB ATI RAGE-XL 64Bit /66MHz PCI-X Hyper-Threading L2 1M PC3200/PC2700/ VGA 2 4.1.1 Jumpers 4-2 1. 2. 3. 4. 5. 6. Keyboard power (3-pin KBPWR1) Gigabit LAN1 controller setting (3-pin LAN_EN1) Gigabit LAN2 controller setting (3-pin LAN_EN2) Onboard VGA setting (3-pin VGA_EN1) Recovery setting (3-pin RECOVERY1) Clear RTC RAM (3-pin CLRTC1) 4-4 4-4 4-5 4-5 4-5 4-6 1. 2. 3. 4. 5. 6. 7. 8. 9.
4.1.2 FAN1 PCI1 BUZZER1 4Mbit Firmware Hub BPSMB1 J3 Super I/O USB34 PS2_MS1 PS2_KB1 25cm (9.9in) KBPWR1 RECOVERY1 PANEL1 VGA_EN1 COM1 VGA1 Intel Hance-Rapid ICH CR2032 3V Lithium Cell CMOS Power PRI_IDE1 SEC_IDE1 CHASSIS1 ATI RAGE-XL VGA Controller BMCSOCKET1 CLRTC1 SATA2 PCIX1 LAN_EN1 SATA1 31.1cm (12.
4.2 1. (3-pin KBPWR1) [2-3] +5VSB 1 +5VSB 4.5.1 BIOS ATX KBPWR1 2 3 1 2 No KB Wake-Up (Default) ® KB Wake-Up PSCH-LR PSCH-LR Keyboard Power Setting 2.
3. Gigabit LAN2 (3-pin LAN_EN2) Intel 82547 Gigabit LAN Gigabit LAN [2-3] RJ45 LAN_EN2 1 2 ® 2 3 Enable (Default) Disable PSCH-LR PSCH-LR LAN_EN2 Setting 4. VGA 3-pin VGA_EN1 VGA [2-3] VGA VGA_EN1 1 2 2 3 Enable (Default) ® Disable PSCH-LR PSCH-LR VGA Jumper Setting 5. Recovery 3-pin RECOVERY1 BIOS BIOS 1 awdflash.
4 [1-2] 5 RECOVERY1 1 2 Normal (Default) ® 2 3 Recovery PSCH-LR PSCH-LR RECOVERY Setting 6.
4.3 IDE 1. 34-1 pin FLOPPY1 FLOPPY1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® PIN 1 PSCH-LR PSCH-LR Floppy Disk Drive Connector 2.
3. IDE 40-1 pin PRI_IDE SEC_IDE IDE UltraDMA/100/66 IDE CD-ROM IDE IDE Master Slave Primary Secondary UltraDMA/100/66 IDE Master Slave UltraDMA/100/66 IDE Slave UltraDMA/100/66 UltraDMA/100/66 1. 2. IDE UltraDMA UltraDMA/100/66 PRI_IDE1 SEC_IDE1 ® PSCH-LR NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
4. Serial ATA 7-pin SATA1, SATA2 Serial ATA Serial ATA 133MB 150MB Parallel ATA Ultra ATA/133 SATA2 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND ® SATA1 PSCH-LR GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND PSCH-LR SATA Connectors Serial ATA 1. Serial ATA Serial ATA 2. Parallel ATA SATA BIOS AP140R-E1 5.4.
5. 20-pin ATXPWR1, 4-pin ATX12V1 ATX +12V 20 ATXPWR 4-pin ATX +12V +12V +12V +5VSB 8 2 300 +5.0VDC +5.0VDC -5.0VDC COM COM COM PS_ON# COM -12.0VDC +3.3VDC ATXPWR1 ATX12V1 +12V DC GND +12V DC GND Pin 1 PSCH-LR +12.0VDC +5VSB PWR_OK COM +5.0VDC COM +5.0VDC COM +3.3VDC +3.3VDC ® PSCH-LR ATX Power Connectors 6.
LEDNC J3 ® PSCH-LR PSCH-LR J3 Connector 7. 3-pin FAN1/2/3/4/5/6 550 1100 39.6 /+12 13.2 3.
8. 4-1 pin CHASSIS1 CHASSIS Chassis Signal Ground Chassis Signal Ground CHASSIS1 GND Chassis Signal (Default) ® +5VSB_MB PSCH-LR PSCH-LR Chassis Alarm Lead 9. USB 10-1 pin USB34 480 Mbps USB USB 1.1 USB 2.
10.
• ATX 2-pin PWRBTN BIOS (2-pin MSG_LED) • • Location 2-pin FP_LOCSW Location 4-14
BIOS BIOS BIOS BIOS
5.1 BIOS BIOS BIOS 5.1.1 USB2.0 USB 1. DOS a. 1.44 MB format a:/s DOS b. Windows XP a. b. c. d. 1.44 MB 3.5 e. 2.
5.1.2 BIOS BIOS BIOS BIOS AwardBIOS Flash Utility AWDFLASH.EXE BIOS BIOS 1. ( WWW FTP) BIOS *.BIN 2. BIOS BIOS 3. 4. POST Alt 5. AWDFLASH 6. AWDFLASH 7.
5.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS CMOS RAM BIOS POST Power-On Self Test DELETE DELETE RESET Ctrl + Alt + Delete BIOS BIOS BIOS 5.
5.2.1 BIOS Select Menu Time (hh:mm:ss) Date (mm:dd:yy) 11: 10 : 30 Wed, Mar 24 2004 Legacy Diskette A [1.44M, 3.5 in.] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave [None] [None] [None] [None] Base Memory Extended Memory Total Memory 640K 261120K 26114K Item Specific Help Change the day, month, year and century. 5.2.
5.2.3 5.2.4 5.2.5 [Enter] 5.2.6 5.2.
5.3 Main Menu BIOS System Time (hh:mm:ss) System Date (mm:dd:yy) 11: 10 : 30 Wed, Apr 7 2004 Legacy Diskette A [1.44M, 3.5 in.] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave [None] [None] [None] [None] Base Memory Extended Memory Total Memory 640K 261120K 26114K Select Menu Item Specific Help Change the internal clock. System Time [hh:mm:ss] Tab 00 23 Tab + Shift 00 59 00 59 System Date [mm/dd/yy] + 1 12 Shift 1 31 2099 Tab Tab Legacy Diskette A [1.
5.3.1 Primary IDE Master Primary Master Select Menu Auto-Detection [Press Enter] Item Specific Help Primary IDE Master Access Mode [Auto] [Auto] To auto-detect the HDD’s size, head...on this channel. Capacity 0 MB Cylinder Head Precomp Landing Zone Sector PIO Mode UDMA Mode Transfer Mode S.M.A.R.T Status 0 0 0 0 0 [Auto] [Auto] None None Auto-Detection [Press Enter] IDE Detecting Hard Drive...
Access Mode [Auto] [Auto] Primary IDE Master IDE [Manual] [CHS] [CHS][LBA][Large][Auto] PIO Mode [Auto] PIO Programmed Input/Output IDE Mode 0 Mode 4 [Auto][Mode 0][Mode 1][Mode 2][Mode 3][Mode 4] UDMA Mode [Auto] [Auto] Ultra DMA [Disabled] IDE Ultra DMA [Disabled][Auto] AP140R-E1 5-9
IDE [Manual] IDE Access Mode Primary IDE Master [CHS] Primary Master Select Menu Auto-Detection [Press Enter] Item Specific Help Primary IDE Master Access Mode [Manual] [CHS] Selects the type of fixed disk connected to the system. [Manual] lets you select the number of cylinders, heads, etc. Note: PRECOMP=65535 means NONE. Capacity 0 MB Cylinder Head Precomp Landing Zone Sector PIO Mode UDMA Mode Transfer Mode S.M.A.R.T.
Landing Zone Sector Transfer Mode [None] S.M.A.R.T. Status S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) [None] IDE BIOS IDE FDISK active 5.3.2 Primary IDE Slave Primary IDE Slave 5.3.1 Primary IDE Master 5.3.3 Secondary IDE Master Secondary IDE Master 5.3.1 Primary IDE Master 5.3.4 Secondary IDE Slave Secondary IDE Slave 5.3.
5.4 Advanced menu Select Menu Advanced BIOS Features CPU Configuration Memory Configuration Chipset Onboard Device PCIPnP USB Configuration Item Specific Help Virus Protection, Boot Sequence... 5.4.
Console Redirection [Enabled] [Enabled] BIOS [Disabled] [Disabled] [Enabled] COM BIOS Console Console Baud Rate [19200] Console Redirection [19200][38400][57600][115200] Baud Rate [9600] Agent After Boot [Disabled] [Enabled] [Disabled] [Enabled] 5.4.2 CPU CPU Configuration CPU CPU Configuration CPU L1 & L2 Cache Hyper-Threading Technology CPU Feature [Enabled] [Enabled] [Press Enter] Select Menu Item Specific Help Disable/Enable CPU L1/ L2 cache.
CPU CPU Feature Thermal Management Select Menu Thermal Monitor 1 Item Specific Help Thermal Management 5.4.3 Memory Configuration Memory Configuration DRAM Frequency Memory Timing Selectable Cache Latency Time Active to Precharge Delay DRAM RAS# to CAS# Delay DRAM RAS# Precharge Memory Parity Check 5-14 [Auto] [By SPD] 2.5 7 3 3 Enabled Select Menu Item Specific Help Set DRAM Frequency.
DRAM Frequency [Auto] 533 FSB CPU [DDR266] [DDR333] [Auto] 800 FSB CPU [DDR266] [DDR333] [DDR400][Auto] Memory Timing Selec table [By SPD] SPD Serial Presence Detect [Manual] [By SPD] Configure DRAM Timing by SPD [Manual] CAS# Latency Time [2.5] SDRAM [2][2.
5.4.4 Chipset Chipset Frequency/Voltage Control Init Display First Auto Detect PCI Clk Select Menu Item Specific Help [PCI VGA Slot] [Enabled] CPU Change CPU’s clock and voltage Frequency/Voltage Control Init.
Frequency/Voltage Control Frequency/Voltage Control CPU Clock Ratio Select Menu Item Specific Help [15 X] Sets the ratio between the CPU core clock and the FSB frequency.
5.4.5 Onboard Device Onboard Device H/W Jumper of CSA LAN -> Onboard CSA LAN Boot ROM H/W Jumper of ONB LAN -> Onboard LAN Boot ROM SuperIO Device SATA Configuration Select Menu Enabled [Disabled] Enabled [Disabled] Item Specific Help Enable/Disable Onboard CSA LAN device boot ROM support.
SuperIO SuperIO Device Serial Port1 Address Select Menu [3F8/IRQ4] Item Specific Help Set Base I/O address for serial port 1. Serial Port 1 [3F8/IRQ4] COM 1 2 IRQ4] [2E8H/IRQ10] [Disabled] COM 2 COM 1 COM [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/ SATA SATA Configuration *** On-Chip Serial ATA Setting *** On-Chip Serial ATA [Disabled] SATA Mode IDE Serial ATA Port0 Mode Primary Master Serial ATA Port1 Mode Primary Slave AP140R-E1 Select Menu Item Specific Help [Disabled]: Disable SATA Controller.
**On-Chip Serial ATA On-chip Serial ATA [Auto] serial ATA serial ATA [Disabled] [Auto] [Combined Mode] [Enhanced Mode] [SATA Only] a. b. c. d. e.
Parallel Serial ATA Primary IDE A: Hard disk 1 B: Hard disk 2 Secondary IDE C: Hard disk 3 D: Hard disk 4 SATA E: SATA hard disk 1 F: SATA hard disk 2 A Auto B D E F Enhanced Mode Combined Mode Serial ATA Port0 Mode [Primary Master] Serial ATA Port1 Mode [Primary Slave] x x Combined Mode Serial ATA Port0 Mode [Secondary Master] Serial ATA Port1 Mode [Secondary Slave] SATA Only x C x x x x x x Disabled AP140R-E1 5-21
5.4.6 PCI IRQ PCI PnP PCI/PnP DMA PCI/PnP PCIPnP Select Menu Reset Configuration Data [Disabled] Item Specific Help Resources Controlled By IRQ Resources [Auto] PCI/VGA INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin [Disabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Default is Disabled.
INT Pin 1~8 Assignment [Auto] [Auto][3][4][5][7][9][10] [11][12][14][15] IRQ Resources Resources Controlled By PCI IRQ [Manual] PCIPnP Select Menu [Disabled] Item Specific Help Resources Controlled By IRQ Resources [Manual] PCI/VGA INT Pin INT Pin INT Pin INT Pin [Disabled] [Auto] [Auto] [Auto] [Auto] When resources are controlled manually, assign each system interrupt a type depending on the type of device using the interrupt.
5.4.7 USB USB USB Configuration Select Menu USB Controller USB 2.0 Support USB Legacy Mode Support Item Specific Help [Enabled] [Enabled] [Enabled] Configures the USB controller. USB Controllers [Enabled] USB [Enabled] [Disabled] USB 2.0 Controller [Enabled] USB 2.
5.5 Power menu ACPI APIC Support APM Configuration Hardware Configuration [Enabled] Select Menu Item Specific Help Enable/Disable ACPI support for Operating System.
5.5.
Restore on AC Power Loss [Power Off] Power Off Power On Last [Power State Off] [Power On] [Last State] Video Off Method [DPMS] DPMS (Display Power Management DPMS [Blank [V/ DPMS GREEN Blank System) BIOS Screen] H SYNC+Blank] BIOS Screen [Blank Screen] [V/H SYNC+Blank] [DPMS] Video Off in Suspend [Yes] Video Off [Yes] [No] MODEM Use IRQ [3] MODEM IRQ [NA][3][4][5][7][9] [10][11] Soft-Off by PWR-BTTN [Instant-Off] [Instant-Off] [Delay 4 Sec.] [Instant-Off][Delay 4 Sec.
Power On Function [BUTTON ONLY] [Password] [Hot Key] [Any KEY] [BUTTON ONLY] [PS/2 Mouse] KB Power On Password [Enter] Power On Function [Password] Hot Key Power On [Ctrl-F1] [Ctrl-F1] ...[Ctrl-F12] Power On Function [Hot Key] Resume by Alarm [Disabled] RTC [Enabled] [Disabled] [Enabled] Date(of Month) Alarm [0] [Min=0] [Max=31] Time (hh:mm:ss) Alarm [0:0:0] 1. 2. 3. 4. 5. 6.
5.5.2 Hardware Monitor Hardware Monitor Voltage Monitor M/B Temperature CPU Temperature Current FAN1 Speed Current FAN2 Speed Current FAN3 Speed Current FAN4 Speed Current FAN5 Speed Current FAN6 Speed Select Menu Item Specific Help 49oC/109oF 48oC/118oF 0 RPM 0 RPM 0 RPM 0 RPM 0 RPM 0 RPM Press Enter to view. Voltage Monitor Voltage Monitor CPU VCORE VOLTAGE +3.3V VOLTAGE +12V VOLTAGE MCH VCORE +1.5V VOLTAGE DDR +2.5V VOLTAGE 5VCC 5VSB VBAT VOLTAGE 1.45 3.34 11.91 1.50 2.57 4.94 4.72 3.
5.6 Boot Menu Select Menu Boot Device Priority Item Specific Help Hard Disk Boot Priority Removable Device Priority Boot Settings Configuration Security 5.6.1 Boot Device Priority Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [Removable] [CDROM] [Hard Disk] Select Menu Item Specific Help Select your Boot Device Priority.
5.6.2 Hard Disk Boot Priority Hard Disk Boot Priority 1. 2. 3. 4. 1st Master: 1st Slave : 2nd Master: Bootable Add-in Cards Select Menu Item Specific Help Use or arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press to exit this menu. 1st Master 1st Slave 2nd Master Bootable Add-in Cards 5.6.3 Priority Removable Device Removable Device Priority 1.
5.6.4 Boot Settings Configuration Boot Settings Configuration Boot Other Device Quick Power On Self Test Halt On Case Open Warning Boot Up Floppy Seek Boot Up NumLock Status Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) [Enabled] [Enabled] [All, But Diskette] [Enabled] [Enabled] [On] [Disabled] 6 250 Select Menu Item Specific Help Select your Boot Device Priority.
Bootup Num-Lock Status [On] NumLock [Off] [On] Typematic Rate Setting [Disabled] Typematic Rate [Disabled] [Enabled] Typematic Rate Setting [Enabled] Typematic Rate (Chars/Sec) [6] [6] [8][10] [12][15] [20][24] [30] Typematic Rate (Msec) [250] [250] [500][750] [1000] 5.6.5 Security Security Supervisor Password User Password Password Check AP140R-E1 Select Menu Clear Clear [Setup] Item Specific Help Supervisor password control full access.
Supervisor Password [Clear] User Password [Clear] 1. 2. Supervisor Password User Password [Enter] Enter Password 8 [Enter] 3. [Enter] Confirm Password [Set] 1. Supervisor Password User Password [Enter] PASSWORD DISABLED!!! Press any key to continue... 2.
5.7 BIOS Exit menu BIOS BIOS Select Menu Exit & Save Changes Exit & Discard Changes Load Setup Defaults Discard Changes Item Specific Help This option saves data to CMOS before exiting Setup.
Load Setup Defaults F5 Enter Yes No BIOS BIOS Discard Changes BIOS Enter Yes BIOS No 5-36 BIOS BIOS
6.
6.1.1 Serial ATA RAID Serial ATA SATA SATA RAID 1. SATA 2. 3. 6.1.2 RAID SATA RAID RAID Adaptec RAID 6300ESB Configuration] SATA [SATA Mode] RAID BIOS [RAID] [SATA 6.1.3 Adaptec RAID Adaptec RAID RAID 0 1 SATA SATA SATA Adaptec RAID 1. SATA 2.
RAID Array Configuration Utility Disk Utilities SATA 6.1.4 Create RAID RAID 0 Array Configuration Utility RAID 0 1.
2. Create Array 3. RAID 0 4.
5. Array Properties RAID 0(Stripe) 6. RAID 0 7.
8. Create RAID via Init No Migrate 9.
10.
RAID 1 RAID 1 RAID 1 1. RAID 0 2. Array Properties (Mirror) 3.
4. Create RAID via Quick Init 5. Done 6.
7. RAID 1 Array Manage 8.
RAID 0 RAID 0 1. Manage Array 2.
3. RAID 4.
RAID 1 RAID 1 1. RAID 0 1 RAID 1 2. Delete 1 3.
4.
RAID Adapter BIOS RAID RAID RAID RAID SATA RAID 1 RAID 1. 2. 1.1.3 Adaptec RAID Array Configuration Utility 3. Manage Arrays RAID 4.
5. 6.
6.1.5 Disk Utilities Disk Utilities SATA 1. Disk Utilities 2.
3. Verify Disk Media Format Disk 4.
A Migrate RAID 0 1. 2. 3.
4. Migrate 1 5.
B Build RAID 1 1. 2. 3.
4. Build 5.
C Clear 1. 2. 1-10 4 Clear 3.
4.
6.2 RAID RAID RAID 6.2.1 RAID Windows 2000/2003 RAID Windows RAID 1. 2. makedisk.exe RAID Intel 6300ESB RAID Driver Disk \Drivers\6300ESB\Windows 3. 4. 5. RAID DOS RAID 1. SupportCD DOS A:\>X: X:> cd \Drivers\6300ESB\Windows\ X:\Drivers\6300ESB\Windows\> copy * b: X:\Drivers\6300ESB\Windows\> copy *.oem b: X:\Drivers\6300ESB\Windows\> md d:\win32\ X:\Drivers\6300ESB\Windows\> cd win32 X:\Drivers\6300ESB\Windows\win32> copy *.* b:\win32 windows X: 6-26
6.2.2 Intel 6300ESB RAID Windows 2000/2003 Server Windows 2000/2003 Server Intel 6300ESB RAID 1. Windows 2000/2003 Server Windows 2000/2003 2. Press F6 if you need to install a thrid party SCSI or RAID driver... 3.
4. Intel 6300ESB RAID 5. 6. 7.
Windows 2000/2003 Server Windows 2000/2003 Server Intel 6300ESB RAID 1. 2. Windows 3. Administrator RAID Cancel Windows Computer 4. My Properties Hardware Device Manager 5. RAID controller Properties 6. Driver Update Driver 7. Updgrade Device Driver Wizard Next 8. Intel 6300ESB RAID 9. Search for a suitable driver for my device(recommended) Next 10.
11. Finish Intel 6300ESB RAID 1. 2. 3. 4. Windows Properties Hardware Device Manager SCSI and RAID controllers <+> Adaptec Embedded Serial ATA HostRAID Adaptec Embedded Serial ATA HostRAID Properties 5. Driver Driver Details RAID 6.
Red Hat Linux Red Hat Linux 1. SupportCD SCSI/RAID Linux 6300ESB SATA RAID Driver [CD-ROM] \Drivers\6300ESB\Linux\ Redhat 9 0+release+build+16.gz aarich-2.01.016-i686-rh90.img aarich-2.01.016-i686-rh90.img *.zip 2. Linux linux dd AP140R-E1 Windows RH9. *.
3. 4.
5. fd0 OK Enter 6. 7.
6.3 6.3.1 Intel Windows 2000 Server Windows 2000 Server 1. 2. 3. Windows Intel Administrator Cancel 4. Intel PRO/1000 BIN 5. Intel PRO Network Connections Drivers 6-34 ASSETUP.
Intel 1. 2. 3. Windows Properties Hardware Device Manager Network adapters <+> Intel(R) PRO/1000 XXX Network Connect 4. Intel(R) PRO/1000 XXX Network Connect Properties 5. Driver Driver Details 6.
Windows 2003 Server Windows 2003 Server 1. 2. 3. Windows Intel Administrator Cancel 4. Intel PRO/1000 BIN 5. Intel PRO Network Connections Drivers 6-36 ASSETUP.
Intel 1. 2. 3. Windows Properties Hardware Device Manager Network adapters <+> Intel(R) PRO/1000 XXX Network Connect 4. Intel(R) PRO/1000 XXX Network Connect Properties 5. Driver Driver Details 6.
RedHat Linux RedHat Linux 1. 2. 6-38 Intel mount /mnt/cdrom Disks CD-ROM /Drivers/Lan/Intel/PRO1000/LINUX Intel LAN Pro1000 e1000-X.X.XX.tar X.X.XX e1000-5.2.39.
3. tar zxf e1000 -x.x.xx.tar.gz Extract Here 4. cd e1000-x.x.x/scr/ 5. scr scr make install 6.
6.4 VGA 6.4.1 ATI RAGE XL Windows 2000 Server Windows XP/2003 Server ATI RAGE XL Windows 2000 Windows 2000 Windows 2003/XP Windows 2000 ATI Rage XL 1. ATI Rage XL E: 6-40 E:\Drivers\ATI\W2K Setup.
2.
6-42
A
A.1 A.1.
A.1.2 (V) +3.3V +5V +12V -12V +5VSB 3.14 4.75 11.4 -10.8 4.75 (V) 3.3 5 12 -12.2 5 (A) +3.3V +5V +12V -12V +5VSB 0.3 0.8 0.3 0 0 (V) Ripple/Noise 50mVp-p 50mVp-p 120mVp-p 120mVp-p 50mVp-p 3.46 5.25 12.6 -13.2 5.25 (A) 20 28 18 0.8 2 (W) 25 3 (OVP) (V) +3.3V +5V +12V -12V +5VSB 3.9 5.7 13.3 -13.3 5.7 AP140R-E1 (V) 4.5 6.5 15 -15 6.
A.2 CPU Vendor Model L2 cache L3 cache Clock Bus speed Intel Pentium4 2.8GHz 512KB - 21 533 Intel Pentium4 3.0GHz 512KB - 15 800 Intel Pentium4 3.2GHz 512KB - 16 800 Intel Pentium4 3.
A.3 1. 115V/230V 2. 3. 4. 1. (POST) 2.
1. 2. 3. Non-system disk or disk error 1. primary active primary 2. SCSI SCSI 1. RJ-45 2.
