RS720-X7/RS8 Manual

ASUS RS720-X7/RS8 6-3
6.1.3 RAID controller selection
You can choose either the LSI Software RAID Conguration Utility or the Intel
Rapid Storage Technology as the default utility to create RAID set(s). See
5. RAID
congurationutilityselection
on page 4-6 for details.
6.1.4 Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s)
using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Advanced
Menu >
PCHSATAConguration
, then press <Enter>.
3. Set
SATA Mode
to [RAID Mode]
4. Press <F10> to save your changes and exit the BIOS Setup.
Refer to Chapter 5 for details on entering and navigating through the BIOS
Setup.