RS720-X7/RS8 Manual

6-20 Chapter 6: RAID conguration
UsingtheObjectscommand
To check data consistency using the
Objects
command
1. From the
Management Menu
, select
Objects
, and then select
Virtual Drive
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
3. Select
Check Consistency
from the pop-up menu, and then press <Enter>.
4. When prompted, use the arrow keys to select
Yes
from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.