User Guide RT-N10P Superspeed Wireless N Router
E8145 First Edition February 2013 Copyright © 2013 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Table of contents 1 Overview 5 Package contents......................................................................................... 5 Hardware features........................................................................................ 6 2 Setting up your wireless network 9 Positioning your router.............................................................................. 9 What you need............................................................................................
Table of contents 4 Using the utilities 37 Device Discovery........................................................................................37 Firmware Restoration................................................................................39 5 Troubleshooting 41 Troubleshooting.........................................................................................41 ASUS DDNS Service...................................................................................
1 Overview Package contents RT-N10P wireless router Network cable (RJ-45) Power adapter Quick Start Guide Warranty card • If any of the items is damaged or missing, contact ASUS for technical inquiries and support. Refer to the ASUS Support Hotline list at the back of this user manual. • Keep the original packaging material in case you would need future warranty services such as repair or replacement.
Hardware features Front P Status indicators LED Power Wireless WPS WAN Wide Area Network LAN 1-4 Local Area Network Status Indication Off No power On System ready Flashing slowly Rescue mode Off No power On Wireless system ready Flashing Transmitting or receiving data (wireless) Flashing WPS in progress Off No power or no physical connection On Has physical connection to an Ethernet network Flashing Transmitting or receiving data (through Ethernet cable) Off No power or no ph
Rear 1 2 Label 1 Reset 3 4 5 6 Description Press this button for more than five seconds to restore the system to its factory default settings. Press this button to power on/off the wireless router. 2 Power 3 Insert the AC adapter into this port to connect your router to a power source. 4 Connect RJ-45 Ethernet cables to these ports to establish LAN connection. LAN1-LAN4 5 6 WAN WPS Connect an RJ-45 Ethernet cable to this port to establish WAN connection.
Bottom panel 1 2 Item 1 Description Mounting hooks Use the mounting hooks to mount your router on concrete or wooden surfaces using two round head screws. 2 Air vents These vents provide ventilation to your router. Mounting the wireless router to a wall is not recommended as it reduces wireless performance.
2 Setting up your wireless network Positioning your router To get the best wireless network performance from your wireless router, follow the recommendations below: • Place the wireless router at the center of your network for maximum wireless coverage. • Keep the device away from metal obstructions and away from direct sunlight. • Keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.
What you need To set up your network, you need one or two computers that meet the following system requirements: • Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX) • IEEE 802.11b/g/n wireless capability • An installed TCP/IP service • Web browser such as Microsoft Internet Explorer, Mozilla Firefox, Apple Safari, or Google Chrome • If your computer does not have built-in wireless capabilities, install an IEEE 802.11b/g/n WLAN adapter to your computer to connect to the network.
Wired connection Your wireless router supports both a straight-through or crossover cable when setting up a wired connection. To set up a network using a wired connection: 1. Insert your wireless router’s AC adapter to the DC-In port and plug it to a power outlet. 2. Using the bundled network cable, connect your computer to your wireless router’s LAN port. RT-N10P Ensure that the LAN LED is blinking. 3 Using another network cable, connect your modem to your wireless router’s WAN port. 4.
Wireless connection To set up your wireless network: 1. Insert your wireless router’s AC adapter to the DC-In port and plug it to a power outlet. 2 Using the bundled network cable, connect your modem to your wireless router’s WAN port. 3. Insert your modem’s AC adapter to the DC-In port and plug it to a power outlet. 4. Install an IEEE 802.11b/g/n WLAN adapter on your computer. • For details on connecting to a wireless network, refer to the WLAN adapter’s user manual.
Before you proceed Before configuring your wireless router, apply the steps described in this section to each computer on the network to avoid problems connecting to the wireless network. A. Disable any configured proxy servers. Windows® 7 1. Click Start > Internet Explorer. 2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings window, uncheck Use a proxy server for your LAN. 4. Click OK then Apply. MAC OSX 1. From your Apple Safari browser, click Safari > Preferences > Advanced. On the Proxies item, click Change Settings... 2. From the Network screen, uncheck FTP Proxy and Web Proxy (HTTP). 3. Click OK then Apply.
B. Configure TCP/IP settings to automatically obtain an IP address. Windows® 7 1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings. 2. On the Network Connections window, click on Local Area Connection. 3. On the Local Area Connection Network Status window, click Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), then click Properties.
6. Tick Obtain an IP address automatically. 7. Click OK.
MAC OSX 1. Click Apple Menu >System Preferences > Network 2. Click Ethernet on the left panel. 3. On the Configure IPv4, item select Using DHCP. 4. Cllick Apply.
C. Disable dial-up networking Windows® 7 1. Click Start > Internet Explorer. 2. Click Tools > Internet Options > Connections tab. 3. Tick Never dial a connection. 4. Click Apply then OK.
3 Network configuration using the web GUI Logging in to the web GUI Your ASUS Wireless Router uses a web-based user interface that allows you to configure the router using any web browser such as Internet Explorer, Mozilla Firefox, Apple Safari, or Google Chrome. To log in to the web GUI: 1. Launch your web browser and manually key in the wireless router’s default IP address: 192.168.1.1 2. On the login page, key in the default user name (admin) and password (admin).
3. The wireless router GUI provides access to various configuration settings. Setting up the Internet connection When setting up the Internet connection for the first time, press the Reset button on your wireless router to reset it to its factory default settings.
Quick Internet Setup (QIS) with auto-detection The Quick Internet Setup (QIS) feature guides you in quickly setting up your Internet connection. To use QIS with auto-detection: 1. Launch a web browser such as Internet Explorer, Mozilla Firefox, Apple Safari, or Google Chrome. 2. Quick Internet Setup will launch automatically. Click Next. • If QIS failed to launch automatically, manually launch your wireless router's web GUI to access the QIS page. To do this, follow these steps: 1.
3. Key in a new administrator password to prevent unauthorized access to the router. Click Next. 4. Select Wireless router mode, Repeater mode, or Access Point (AP) mode. Click Next. To set up a wireless network with Internet access, use Wireless router mode.
5. The wireless router will attempt to identify your connection type. If needed, select the necessary connection type and key in any necessary information required, such as your ISP user name and password. Obtain the necessary information about your Internet connection type and additional login information from your Internet Service Provider.
6. In the Wireless setting screen, key in a network name (SSID) and assign a security key for your wireless connection. Click Apply. 7. A summary of your network settings will be displayed. Click Next to continue.
8. Read the Wireless Network Connection Tutorial. Click Finish.
Setting up wireless security To protect your wireless network from unauthorized access, you need to configure your router’s security settings. To set up the wireless security settings: 1. Key in 192.168.1.1 on your web browser. 2. On the login screen, key in the default user name (admin) and password (admin), then click OK. The wireless router’s web GUI launches. 3.
4. On the Wireless name (SSID) field, key in a unique name for your wireless network. 5. From the Authentication Method dropdown list, select the encryption method for your wireless network. The IEEE 802.11n standard prohibits using High Throughput with WEP or WPA-TKIP as the unicast cipher. If you use these encryption methods, your data rate will drop to IEEE 802.11g 54Mbps connection. 6. Key in your security passkey. 7. Click Apply.
Creating your Guest Network Setting up a Guest Network provides wireless Internet connectivity for temporary visitors while restricting access to your private network. To create your guest network: 1. Click Guest Network on the navigation panel. 2. Click Enable. 3. To configure additional options, click any of the items listed.
4. Assign a wireless name for your temporary network on the Network Name (SSID) field. 5. Select an Authentication Method. 6. Select a WEP Encryption method. 7. Specify the Access time or click Limitless. 8. Select Disable or Enable on the Access Intranet item. 9. Click Apply.
Using the Traffic Manager Managing QoS (Quality of Service) Bandwidth The Quality of Service feature allows you to set the bandwidth priority and manage network traffic. To set up QoS: 1. Click Traffic Manager on the navigation panel and click the QoS tab. 2. Click ON to enable QoS. 3. Click Save. Your bandwidth information is available from your ISP.
3. If you want to prioritize specific network applications and network services, click User-defined Priority on the upperright hand corner. 4. Adjust the values as needed. Click Apply.
Monitoring Traffic Click the Traffic Monitor tab to view real-time or historical bandwidth information of your Internet, Wired, and Wireless connections.
Configuring Advanced settings Setting up the DHCP Server Your wireless router uses DHCP to assign IP addresses automatically on your network. You can specify the IP address range and lease time for the clients on your network. To configure the DHCP server: 1. Click LAN on the navigation panel. 2. Click the DHCP Server tab. 3. In the Enable the DHCP Server field, tick Yes. 4. In the IP Pool Starting Address field, key in the starting IP address. 5.
6. In the Lease Time field, specify in seconds when an assigned IP address will expire. Once it reaches this time limit, the DHCP server will then assign a new IP address. • ASUS recommeds that you use an IP address format of 192.168.1.xxx (where xxx can be any number between 2 and 254) when specifying an IP address range. • An IP Pool Starting Address should not be greater than the IP Pool Ending Address.
Upgrading the firmware Download the latest firmware from the ASUS website at http://support.asus.com To upgrade the firmware: 1. Click Administration from the navigation panel. 2. Click the Firmware Upgrade tab. 3. In the New Firmware File item, click Browse. Navigate to the downloaded firmware file. 4. Click Upload. If the upgrade process fails, the wireless router automatically enters rescue mode and the power LED indicator on the front panel starts flashing slowly.
Restoring/Saving/Uploading settings To restore/save/upload wireless router settings: 1. Click Administration on the navigation panel. 2. Click the Restore/Save/Upload Setting tab. 3. Select a task from the configuration options: • To restore to default factory settings, click Restore, and click OK once prompted. • To save the current system settings, click Save, navigate to the folder where you intend to save the file and click Save.
4 Using the utilities ASUS wireless router utilities can be downloaded from http://support.asus.com After downloading and installing the setup file for the ASUS wireless utilities, the Device Discovery and Firmware Restoration utilities will be added to your applications. Device Discovery Device Discovery is an ASUS WLAN utility that detects any ASUS wireless routers available on the wireless network and allows you to configure the device.
To launch the Device Discovery utility: • Click Start > All Programs > ASUS Utility > RT-N10P Wireless Router > Device Discovery. When you set the router to Access Point mode, you need to use Device Discovery to get the router’s IP address.
Firmware Restoration Firmware Restoration is used on an ASUS Wireless Router after a failed firmware upgrade. This utility uploads a firmware file to the wireless router. The process takes about three to four minutes. Launch rescue mode before using the Firmware Restoration utility. To launch rescue mode and use the Firmware Restoration utility: 1. Unplug the wireless router from its power source. 2.
4. From your computer’s desktop, click Start > All Programs > ASUS Utility > RT-N10P Wireless Router > Firmware Restoration. 5. Click Browse to navigate to the firmware file, then click Upload. The Firmware Restoration utility is not used to upgrade the firmware of a working ASUS Wireless Router. Normal firmware upgrades must be done through the web GUI. Refer to Upgrading the firmware for more details.
5 Troubleshooting If you encounter problems that are not mentioned in this chapter, contact ASUS Technical Support. Troubleshooting I cannot access the router GUI for configuring the router. • Delete the cookies and temporary files in your web browser. To do this in Internet Explorer 8: 1. Launch your web browser, then click Tools > Internet Options. 2. On the General tab, click Delete under Browsing history. 3. Tick Temporary Internet Files and Cookies. Click Delete.
Authentication: • Use a wired connection to connect to the router. • Check the wireless security settings. • Press the Reset button at the rear panel for more than five seconds. Cannot find the router: • Press the Reset button at the rear panel for more than five seconds. • Check the settings in the wireless adapter such as SSID and encryption method. Cannot access the Internet using a wireless LAN adapter. • Place the router closer to the wireless client.
The ADSL Modem “Link” light is ON (steady and not blinking) and means Internet access is possible, but I still cannot browse the Internet. • • • • Restart your computer. Check if the WAN LED on the wireless router is on. Check the wireless encryption settings. Check if the computer can get an IP address (using both a wired or wireless connection). • Check that your web browser is configured to use the local LAN and is not configured to use a proxy server.
How do you restore the system to its default settings? • Press the Reset button at the rear panel of the wireless router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings of this user manual. The following are the factory default settings: User name: Password: Enable DHCP: IP address: Domain name: Subnet Mask DNS Server 1: DNS Server 2: SSID: 44 admin admin Yes (if WAN cable is plugged in) 192.168.1.1 (Blank) 255.255.255.0 192.168.1.
ASUS DDNS Service RT-N10P Series routers support the ASUS DDNS service. If you have registered for the ASUS DDNS service but need to exchange devices at the service center, inform the service center that you want to keep the original domain name and retain the DDNS service. Visit your local service center for more information.
3. I have registered a domain name before and it has been working well until my friends told me that they could not access my domain name. Check the following: 1. Internet connection is available. 2. The DNS server is working properly. 3. The last time you updated the domain name. If there are still problems in accessing your domain name, contact the service center. 4. Can I register two domain names so I can access my HTTP and FTP servers separately? No, you cannot.
Appendices Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for the detailed recycling information in different regions.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Safety Information To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
NCC 警語 經型式認證合格之低功率射頻電機，非經許可，公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及 功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通 信；經發現有干擾現象時，應立即停用，並改善至無干擾時方 得繼續使用。前項合法通信，指依電信法規定作業之無線電通 信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電 波輻射性電機設備之干擾。 Authorised distributors in Turkey BOGAZICI BIL GISAYAR SAN. VE TIC. A.S. Tel: +90 212 3311000 Addrress: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBUL CIZGI Elektronik San. Tic. Ltd. Sti. Tel: +90 212 3567070 Address: CEMAL SURURI CD.
GNU General Public License Licensing information This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see The GNU General Public License for the exact terms and conditions of this license. We include a copy of the GPL with every CD shipped with our product. All future firmware updates will also be accompanied with their respective source code. Please visit our web site for updated information.
pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have.
Terms & conditions for copying, distribution, & modification 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
4. 5. 6. 7. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHE
Networks Global Hotline Information Region Country Service Hours 09:00-13:00 ; 14:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri Cyprus 800-92491 France Hungary 0033-170949400 0049-1805010920 0049-1805010923 ( component support ) 0049-2102959911 ( Fax ) 0036-15054561 Italy 199-400089 Greece 00800-44142044 Austria Netherlands/ Luxembourg Belgium Norway Sweden Finland Denmark Poland Spain Portugal Slovak Republic Czech Republic Switzerland-German Switzerland-French Switzerland-Italian United Kingdom Ireland
Region Country Australia New Zealand Japan Korea Thailand Singapore Asia-Pacific Malaysia Philippine India India(WL/NW) Indonesia Americas Hotline Numbers 1300-278788 0800-278788 0800-1232787 0081-473905630 ( Non-Toll Free ) 0082-215666868 0066-24011717 1800-8525201 0065-64157917 0065-67203835 ( Repair Status Only ) 0060-320535077 1800-18550163 1800-2090365 0062-2129495000 500128 (Local Only) Vietnam 1900-555581 Hong Kong USA Canada Mexico 00852-35824770 1-812-282-2787 001-8008367847 Service Hours
Region Middle East + Africa Country Egypt Saudi Arabia UAE Turkey South Africa Israel Romania Bosnia Herzegovina Bulgaria Balkan Countries Croatia Montenegro Serbia Slovenia Estonia Latvia Lithuania-Kaunas Lithuania-Vilnius Hotline Numbers 800-2787349 800-1212787 00971-42958941 0090-2165243000 0861-278772 *6557/00972-39142800 *9770/00972-35598555 0040-213301786 Service Hours 09:00-18:00 Sun-Thu 09:00-18:00 Sat-Wed 09:00-18:00 Sun-Thu 09:00-18:00 Mon-Fri 08:00-17:00 Mon-Fri 08:00-17:00 Sun-Thu 08:30-17:
ASUS Contact information ASUSTeK COMPUTER INC. (Asia Pacific) Address Website 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 www.asus.com.tw Technical Support Telephone Support Fax Online support +886228943447 +886228907698 support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Website Online support 800 Corporate Way, Fremont, CA 94539, USA +15107393777 +15106084555 usa.asus.com support.asus.
Manufacturer: Authorised representative in Europe: ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN ASUS Computer GmbH Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY EEE Yönetmeliğine Uygundur.
