Instruction Manual

2-20 ASUS AW1500-I5
SCSI-IDE HDD Bridge
4. Prepare hard disk drive.
Carefully insert the SCSI-IDE
HDD bridge to the hard drive’s
40-1 pin IDE connector and 4-pin
power connector. Make sure the
SCSI-IDE HDD bridge is slotted
properly and placed firmly in
place.
5. Carefully place the hard disk
drive into the drive tray. Align the
hard drive’s four (4) screw holes
with the hard drive tray rails.
Secure hard drive with four (4)
round head screws.
Do not overtighten the screws, the plastic drive tray rails may break.
6. Secure the SCSI-IDE HDD
Bridge to the tray with two (2)
round head screws.
Take caution when assembling or
disassembling the bridge board to the
hard disk drive. The SCSI-IDE HDD
bridge board may break if handled
improperly.