User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-3ASUS BE Series LCD Monitor
6. Power button/power indicator
• To turn the monitor on/off.
• The color denition of the power indicator is listed as the below table.
Status Description
White On
Amber Standby mode
Off Off
7. Microphone
8. Webcam cover shutter
9. Webcam
1.3.2 Back/Side view
1
2
3
4
5
6 7 8 9
10
11
1. Kensington lock slot.
2. Power switch. Press the switch to turn on/off power.
3. AC-IN port. This port connects the power cord.
4. Audio-in port. This port connects PC audio source by the bundled audio
cable.
5. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
6. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
7. HDMI port. This port is for connection with an HDMI compatible device.
8. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal
connection.
9. VGA port. This 15-pin port is for PC VGA connection.
10. USB upstream port. This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
11. USB downstream ports. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.