User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
17
Figure 13: Removing DIMMs
Uninstalling the CPU Heatsink
You need to remove the proprietary CPU heatsink assembly from the motherboard
before you can install a CPU.
To uninstall the CPU heatsink:
1. Open the storage drive assembly. Refer to the previous section for details.
2. Using a Philips screw driver, remove the four screws that secure the CPU
heatsink to the motherboard.
Figure 14: Unscrewing the Heatsink
3. Lift the CPU heatsink, and then set it aside.