Owner manual

18
ASUS CUBX User’s Manual
3. HARDWARE SETUP
Motherboard Features Settings (DIP Switches - DSW)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
3. H/W SETUP
Motherboard Settings
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. (Reserved)
6. AGP Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
CUBX DIP Switches
OFF
ON
12345678910
ON
DSW
CUBX
®
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
CUBX
®
CUBX Jumper Mode Setting
Jumper JumperFree
12
2
3
JEN
OFF
ON
12345678910
DSW
NOTE: In JumperFree™ mode, all dip switches (DSW) must be set to OFF.