Owner manual

34 ASUS CUBX User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

9) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as the

ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake-On-LAN features are enabled

(see 4.5.1 Power Up Control) and that your system has an ATX power supply

with at least 720mA +5V standby power.

CUBX Wake-On-LAN Connector

+5VSB

PME

Ground

WOL_CON

CUBX

10) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that Wake-On-Ring features are enabled

(see 4.5.1 Power Up Control) and that your system has an ATX power supply

with at least 720mA +5V standby power.

CUBX Wake-On-Ring Connector

CUBX

WOR

PIXRI#

Ground