Motherboard TRL-DLS Owner manual

ASUS TRL-DLS User’s Manual38

4. BIOS SETUP

7. The utility starts to program the new BIOS information into the Flash ROM.

The boot block is updated automatically only when necessary. This minimizes

the possibilities of boot problems in case of update failures. When the

programming is done, Flashed Successfully appears.

8. Follow the onscreen instructions to continue.

WARNING! If you encounter problems while updating the new BIOS, DO NOT

turn off the system because this may cause boot problems. Just repeat the process,

and if the problem still persists, load the original BIOS file you saved to the boot

disk. If the Flash Memory Writer utility is not able to successfully update a

complete BIOS file, the system may not boot. If this happens, call the ASUS

service center for support.

Updating BIOS