User Manual

4-48 Chapter 4: BIOS setup
4.7 Boot menu
The Boot menu items allow you to change the system boot options.
Bootup NumLock State [On]
[On] Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
Full Screen Logo [Enabled]
[Enabled] Enables the full screen logo display feature.
[Disabled] Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Wait For ‘F1’ If Error [Enabled]
[Disabled] Disables this function.
[Enabled] The system waits for the <F1> key to be pressed when error occurs.
PCI ROM Priority [Legacy ROM]
[Legacy ROM] Launch Legacy ROM
[EFI Compatibe ROM] Launch UEFI Compatible ROM
Main
Ai Tweaker
Advanced Monitor
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Select the keyboard NumLock state
UEFI BIOS Utility - Advanced Mode
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F6: ASUS Ratio Boost
F10: Save ESC: Exit
F12: Print Screen
Bootup NumLock State On
Full Screen Logo Enabled
Wait For ‘F1’ If Error Enabled
PCI ROM Priority Legacy ROM
Setup Mode EZ Mode
Boot Option Priorities
Boot Option #1 P1: WDC WD...
Boot Option #2 P2: ASUS . . .
Boot Option #3 IBA GE Slo . . .
> CD/DVD ROM Drive BBS Services
> Network Device BBS Priorities
> Hard Drive BBS Priorities
Boot Override
> P5: ASUS DRW-24B3ST
> IBA GE Slot 00CB V1372
> P1: WDC WD2002FYPS-01U1B0
Boot Tool
Exit