User's Manual

A
p
proved—Confid
en
tial
Not Doc. Con
tr
o
l
Marvell Storage Utility (MSU)
Tray Application for Windows 2-11
Copyright © 2010 Marvell CONFIDENTIAL Doc No. MV-S800768-00 Rev. -
October 22, 2010 Document Classification: Proprietary
Not Approved by Document Control. For Review Only. Do Not Distribute.
Figure 2-11 Tray Application: Accelerate Status
2.4.2 Open MSU
Select Open MSU to open MSU in the system’s default browser.
Note: You can also open MSU by double-clicking the Tray Application icon.
2.4.3 Enable/Disable Alarm
The audible alarm is disabled by default. To enable the audible alarm for critical and warning
events, select Enable Alarm. The alarm is played through speakers connected to the Line
Out jack on the computer’s sound card. On controller HBAs and evaluation boards with
on-board buzzer, the hardware buzzer is also sounded.
Note: The audible alarm uses the file c:/program files/marvell/raid/tray/alarm.wav.
2.4.4 Enable/Disable Pop-up Event Messages
Event messages are pop-up messages that appear above the System Tray, as shown in
Figure 2-12. Event messages are enabled by default.
Select Enable Event Messages and Disable Event Messages to toggle between
enable/disable states.
Figure 2-12 Tray Application: Pop-up Event Message