User's Manual
Table Of Contents
- Marvell Storage Utility
- Marvell Customer Satisfaction Survey
- Contents
- 1 Getting Started
- 2 Marvell Storage Utility (MSU)
- 3 MSU for RAID
- 4 MSU for HyperDuo
- A MBU for 88SE91xx IO Processor (IOP)
- B Selecting a RAID Level
- C Icons used in MSU
- D Glossary
- E Troubleshooting
A
p
proved—Confid
en
tial
Not Doc. Con
tr
o
l
Marvell Storage Utility
User Manual for 88SE91xx
3-4 Creating Virtual Disk
Copyright © 2010 Marvell CONFIDENTIAL Doc No. MV-S800768-00 Rev. -
October 22, 2010 Document Classification: Proprietary
Not Approved by Document Control. For Review Only. Do Not Distribute.
Figure 3-2 Create Options
3. As shown in Figure 3-2, select one of the following options:
Select Performance for creating a virtual disk that is optimized for best read and write
performance.
Select Reliability for creating a virtual disk that is optimized for best fault tolerance.
Based on the performance/reliability selection and the capabilities of the RAID controller,
MSU creates a suitable virtual disk using some or all available physical disks.
4. After creating the virtual disk, MSU displays the Property tab for the new Virtual Disk, as
shown in Figure 3-3.