English User Manual ET24 Series
English E6065 First Edition V1 September 2010 Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER, INC. (“ASUS”).
Notices...................................................................................................................................................... 5 Federal Communications Commission Statement.......................................................... 5 Canadian Department of Communications Statement................................................. 6 IC Radiation Exposure Statement for Canada...................................................................
Setting up your All-in-one PC................................................................. 27 English Connecting the wired keyboard and mouse............................................................................27 Connecting the wireless keyboard and mouse.......................................................................27 Powering on the system..................................................................................................................28 Powering off....................
English Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Department of Communications Statement English This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
CE Mark Warning English This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
France Restricted Wireless Frequency Bands English Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
English NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. No Exposure to Liquids DO NOT expose to or use near liquids, rain, or moisture. This product is not waterproof or oil-proof.
Global Environmental Regulation Compliance and Declaration English ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
Notes for this manual English To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Vital information that you MUST follow to prevent injury to yourself. IMPORTANT: Instructions that you MUST follow to complete a task. TIP: Tips and useful information that help you complete a task. NOTE: Additional information for special situations. All illustrations and screenshots in this manual are for reference only.
Safety information English Your All-in-one PC ET24 Series is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface.
Welcome English Congratulations on your purchase of All-in-one PC ET24 Series. The following illustration displays the package contents of your new product. If any of the following items is damaged or missing, contact your retailer.
Getting to know your All-in-one PC English Front view Refer to the following diagram to identify the components on this side of the system.
Webcam The built-in webcam with the built-in digital microphone allows you to start video chats online. 3D Vision IR port (on selected models) The 3D Vision IR port transmits 3D Vision signals to the 3D glasses when you play a 3D video game or watch 3D movies. 3 LCD display (Touch-enabled function on selected models) The 23.6-inch LCD display, with an optimal resolution of 1600 x 900 or 1920 x 1080, features touch function that brings digital life to your fingertips.
Rear view English Refer to the following diagram to identify the components on this side of the system. 1 1 2 3 4 5 6 Power input (DC 19.5V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body.
3 4 HDMI In Port (on selected models) HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/ video interface between any audio/video source, such as a set-top box, DVD player. Display (Monitor) Input (on selected models) 5 LAN port The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.
Side views English Refer to the following diagrams to identify the components on both sides of the system. 1 2 Memory card reader Normally an external memory card reader must be purchased separately in order to read memory cards. This All-in-one PC has a built-in memory card reader that supports SD cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs.
Up Button English 7 Press to display the volume or brightness menu directly. Or use it to scroll up when navigating other menus. The button definition varies with models. 8 Menu Button Press to display the main menu. The menu options vary with models. 9 Down Button Press to display the source or volume menu directly. Or use it to scroll down when navigating other menus. The button definition varies with models.
Using the touch screen English All-in-one PC brings digital life to your fingertips. With a few touches, you can make All-in-one PC work at your command. Your touch functions like a mouse device: • • Touch = left-click on the mouse Touch and hold = right-click on the mouse The touch-enabled screen is available on selected models. Showing the touch pointer The touch pointer, virtual mouse, helps you use the touch-enabled screen more conveniently. To show the touch pointer 1.
Click Change touch input settings. 3. Click the Touch tab on the top and click the box before Show the touch pointer when I’m interacting with items on the screen. Click OK to finish the configuration. English 2. 4. You will see a virtual mouse on the screen when you touch the screen. Cleaning the touch screen The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the screen clean from foreign objects or excessive dust accumulation.
Using the keyboard English Your All-in-one PC comes with a wired or wireless keyboard that facilitates your control of the system. The following keyboard illustration is for reference only. Actual product specifications may vary with territories.
Function keys English The following table defines the colored function keys on the keyboard. To access the colored commands, hold the Function key while pressing a key with a colored command. The actual colored function keys and supported commands may vary with models. Fn + F1: Places the system in suspend mode. Fn + F2: Toggles the internal wireless LAN or Bluetooth (on selected models) ON or OFF with an on-screen-display. When enabled, the corresponding wireless indicator will light.
Positioning your All-in-one PC English Placing on the desktop Place your All-in-one PC on a flat surface such as a table or desk, ������������������������������ pull the stand open, and tilt the display panel to an angle of between 12 and 25 degrees from an upright position. When you tilt the display panel to the angle of 12 degree, a click sound indicates that the display panel is at the proper angle. Avoid the angle less than 12 degree to prevent the display panel from falling forward.
English Mounting to the wall To mount your All-in-one PC to the wall, purchase the optional wall mount pad adapter, wall mount pad and a wall mount kit. Install the wall mount pad according to the following instructions. The following instructions are for reference only. The actual installation procedures may vary depending on your purchased wall mount kit. 1. Remove the four screws on the stand to release the stand. Keep the screws for future use in case you want to reinstall the stand. 2.
Secure the wall mount pad to the pad adapter with the four screws noting the correct orientation. 4. Hook your All-in-one PC to the wall mount kit securely. English 3. The wall mount kit in this illustration is for reference only. 5. Fasten the wall mount kit to the wall following the instructions described in the installation manual that came with your wall mount kit package. For ventilation’s sake, ensure that you leave a distance of 6cm at least between the system and the wall.
English Setting up your All-in-one PC Connecting the wired keyboard and mouse Connect the keyboard to the USB port on the rear panel ( 1 ). Y������������������������ ou may also connect ������������ the keyboard to the USB port on the left side if the keyboard cable is not long enough�������� . T����� hen, 2 connect the mouse to the keyboard USB port ( ). 1 2 Connecting the wireless keyboard and mouse 1. 2. 3. 4. Install batteries to the wireless keyboard and mouse.
Powering on the system English Connect the supplied AC adapter to the DC IN jack on the rear panel ( the Power switch on the right ( 4 ) to turn on the system. 1 2 3 ) and then press 2 3 1 4 WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug to the system. Doing so may damage the AC-DC adapter. Powering off • To power off the LCD display, press the Fn + F7 key system is still running. on the keyboard.
1. Click the wireless network icon with an orange star 2. Select the wireless access point you want to connect to from the list and click Connect to build the connection. English Configuring a wireless connection in the Windows® Notification area. If you cannot find the desired access point, click the Refresh icon on the upper right corner to refresh and search in the list again. Enter the network security key when connecting to a security-enabled network. 3.
Configuring a wired connection English Using a static IP 1. Click the network icon with a yellow warning triangle in the Windows® Notification area and select Open Network and Sharing Center. Ensure that you have connected the LAN cable to the All-in-one PC. 30 2. Click Change adapter settings in the left pane. 3. Right-click Local Area Connection and select Properties.
Click Internet Protocol Version 4(TCP/ IPv4) and click Properties. 5. 6. Select Use the following IP address. Enter your IP address, Subnet mask, and Default gateway. If needed, enter the Preferred DNS server address. After entering all the related values, click OK to finish the configuration. 7. 8. English 4.
Using a dynamic IP (PPPoE) English 1. 2 Repeat steps 1–4 in the previous section. Select Obtain an IP address automatically and click OK. (Continue the following steps if using PPPoE) 32 3. Return to the Network and Sharing Center and then click Set up a new connection or network. 4. Select Connect to the Internet and click Next.
Select Broadband (PPPoE) and click Next. 6. Enter your User name and, Password, and Connection name. Click Connect. 7. Click Close to finish the configuration. English 5.
Click the network icon in the notification area and click the connection you just created. 9. Enter your user name and password. Click Connect to connect to the Internet. English 8.
Bluetooth Wireless Connection English Your All-in-one PC features Bluetooth v3.0 technology and actual transferring speed varies with the connected devices. Alll-in-one PCs with Bluetooth technology eliminates the need for cables for connecting Bluetooth-enabled devices. Examples of Bluetooth-enabled devices may be Notebook PCs, Desktop PCs, mobile phones, and PDAs. Bluetooth-enabled mobile phones You can wireless connect to your mobile phone.
Select a Bluetooth-enabled device from the list and click Next. 4. Enter the Bluetooth security code into your device and start pairing. 5. The paired relationship is successfully built. Click Close to finish the setting. English 3.
Configuring the audio output English All-in-one PC supports different types of audio configurations. Set up the system using stereo speakers. Speaker configurations Set up the system with the following speaker configurations: Name 2-channel (stereo) Speaker system Left speaker and right speaker. Audio jack Headphones/2-channel Audio Out Mic In A stereo speaker set is a left-right, two channel speaker system. A multi-channel audio speaker has a left-right front and left-right rear (surround) channel.
Configuring audio output settings English After connecting a speaker system to your All-in-one PC, follow the steps below to configure the speaker settings: 38 1. Right-click the speaker icon in the Windows® notification area and click Sounds. 2. Select a playback device and click Properties to configure the settings. All-in-one PC ET24 Series 3. Do the advanced configurations, such as adjusting the speaker level and output rate. Click OK to finish the configurations.
1. Click the S.H.E. button on the speedometer on the desktop. 2. The pointer will move from High to Super as shown. English Overclocking your All-in-one PC Click the S.H.E. button again to undo the overclocking configuration.
Using 3D Vision Glasses English Charging your 3D Vision glasses Connect the Type A plug of the provided USB cable to the All-in-one PC and the Type B plug to the 3D vision glasses frame to charge the 3D vision glasses before first use and whenever the power is depleted. Configuring 3D Vision setup 1. 2. 3. 4. 5. 6. 40 Launch the 3D Vision Setup wizard by clicking on Start Menu > NVIDIA Corporation > 3D Vision > Enable 3D Vision. Select Next to begin the Setup Wizard.
8. (For External 3D Vision-Ready LCD displays and notebooks with built-in 3D Vision LCDs) Do you notice flicker in your peripheral vision when looking through the glasses? If you are seeing excessive flicker in your peripheral vision, this screen allows you to change the refresh rate of your display. When you select Yes, the refresh rate options are displayed. Verify your ability to view stereoscopic 3D content.
Adjusting the Refresh rate English The best Refresh rate for 3D Vision effect may differ by territories, follow the instructions below to manually adjust the Refresh rate. Refer to the FAQ at http://www.nvidia.com/content/3dvision/docs/3DVISION_TipsTricks_ Dec08_Screen.pdf for the best Refresh rate in your region. 42 1. Right-click on the desktop and select NVIDIA Control Panel. 2. Click Change resolution on the left pane and adjust the Refresh rate as recommended.
Replacing or upgrading memory English Additional memory will increase application performance by decreasing hard disk access. Visit an authorized service center or retailer for information on memory upgrades for your All-in-one PC. Only purchase expansion modules from authorized retailers of this All-in-one PC to ensure maximum compatibility and reliability.
Recovering your system English Using the hidden partition The recovery partition includes an image of the operating system, drivers, and utilities installed on your system at the factory. The recovery partition provides a comprehensive recovery solution that quickly restores your system’s software to its original working state, provided that your hard disk drive is in good working order.
Based on the different situations in the previous step, data on the selected USB storage device or on the selected partition will be cleared. Click Backup to start backup. English 5. You will lose all your data on the selected USB storage device or on the selected partition. Ensure to back up your important data beforehand. 6. When backing up the factory default environment is completed successfully, click Reboot to restart the system.
Technical support for nVIDIA 3D Vision Glasses English For detailed information on the NVIDIA Control Panel, refer to the 3D Vision User Guide available at www.nvidia.com/3dvision. Visit www.nvidia.com/3dvision/support to access the 24x7x365 online knowledgebase system, where you can submit questions to our tech support staff. Questions may only be submitted in English. 3D Vision customers also have accesses to toll free technical support at 1-800-797-6530 from 8:00 AM-5:00 PM Pacific Time, M-F.
