Instruction Manual

77
GigaX3112 Series Layer 3 Managed Switch
5.3.13 Mirroring
5.3.13.1 mirror mode
To set port mirror mode.
CLI Syntax:
mirror mode
Example:
(config)# mirror mode l2
5.3.13.2 mirror setting
This command mirrors the source interface list traffic to the destination interface.
The mirror type support received traffic, Transmitted traffic, or both.
CLI Syntax:
mirror IFLIST to IFNAME (rx|tx|both)
Example:
(config)# mirror gi1/0/3-5 to gi1/0/9 both
5.3.13.3 show mirror
To show current mirror features.
CLI Syntax:
Show mirror
Example:
ASUS# show mirror
5.3.13.4 no mirror
This command resets the source interfacesʼ received or transmitted traffic or
both the destination interface.
CLI Syntax:
no mirror SRCIFLIST (rx|tx|both)
Example:
(config)# no mirror gi1/0/1,gi1/0/4 rx
5.3.14 Static Multicast
5.3.14.1 mac-address-table multicast
Use the ac-address-table multicast configuration command on the switch to add
multicast static addresses to the MAC address table.
CLI Syntax:
mac-address-table multicast MACADDR vlan VLANID interface
IFLIST
Example:
(config)# mac-address-table multicast 0100.5e11.1111 vlan 2
interface gi1/0/3 1