Owner's Manual

2-38
Chapter 2: Getting started
Post Delay Time [3 sec]
This item appears only when you set the Boot Logo Display item to [Enabled]. This item
allows you to select a desired additional POST waiting time to easily enter the BIOS Setup.
You can only execute the POST delay time during normal boot. The values range from 0 to
10 seconds.
This feature will only work when set under normal boot.
Post Report [5 sec]
This item appears only when you set the Boot Logo Display item to [Disabled]. This item
allows you to select a desired POST report waiting time. Conguration options: [1 sec] - [10
sec] [Until Press ESC]
2.8.3 Bootup NumLock State [On]
[On] Set the power-on state of the NumLock to [On].
[Off] Set the power-on state of the NumLock to
[Off].
2.8.4 Wait For ‘F1’ If Error [Enabled]
[Disabled] Disables the function.
[Enabled] The system waits for the <F1> key to be pressed when error occurs.
2.8.5 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be displayed during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.8.6 Interrupt 19 Capture [Disabled]
[Enabled] Allows the option ROMs to trap Interrupt 19.
[Disabled] Disables this function.
2.8.7 Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode] Allows you to go to EZ Mode of the BIOS after POST.
2.8.8 CSM (Compatibility Support Module)
Allows you to congure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto] The system automatically detects the bootable devices and the add-
on devices.
[Enabled] For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
®
UEFI mode.
[Disabled] Disable the CSM to fully support the Windows
®
Security Update and
Security Boot.