ASUS HYPER M.
Parts and features HYPER M.2 X16 CARD M.2_LED4 M.2_LED3 M.2_LED2 M.2_LED1 M.2 Access LEDs These LEDs will blink to indicate that data are being read/written from/into the M.2 storage devices. PCI Express interface This is the interface for the ASUS HYPER M.2 X16 card to be installed in your motherboard PCI Express slot. Ensure to install the ASUS HYPER M.2 X16 card into a PCI Express 3.0 slot for optimum results. M.2 (NGFF) card connectors (NGFF1-2) These connectors allow you to install M.
Specifications summary PCI Express 3.0 x16 interface Interface Compatible with PCI Express x8, and x16 slots External Connectors 4 x M.2 Socket 3 with M Key design, type 2242/2260/2280/22110 storage devices support (Supports PCIE SSD only) 1 x M.2 FAN Power Switch LED 4 x M.2 Access LEDs RAID support Intel® VROC Ready with Intel® RSTe for X299 Series motherboards Dimension 20.2 x 9.6 x 1.3 cm Compatible Models Support ASUS X299 series motherboard models* * Visit to www.asus.
Getting started To install M.2 storage devices onto your ASUS HYPER M.2 X16 card: 1. Remove the four cover screws that secure the cover to the ASUS HYPER M.2 X16 card, then remove the cover and set it aside. M. 2_ HY LE D4 M. 2_ LE D3 M. 2_ LE D2 M. 2_ LE D1 PE R M. 2X 16 CA RD 2. Secure the stand screws onto the ASUS HYPER M.2 X16 card. HY M.2 _L ED 4 M.2 PE R _L ED 3 M.2 _L ED 2 M.2 _L ED M. 2X 16 1 CA RD 3. Insert the M.2 storage devices into the M.
4. Peel the plastic films off the thermal pads, secure the cover to the ASUS HYPER M.2 X16 card with the cover screws that you removed earlier, then install the ASUS HYPER M.2 X16 card into a PCI Express 3.0 slot. M. 2_ HY LE D4 M. 2_ LE D3 M. 2_ LE D2 M. 2_ LE D1 PE R M. 2X 16 CA RD 6. (Optional) Locate the VROC_HW_KEY connector on your motherboard, then connect a KEY module to enable additional RAID functions with Intel® Virtual Raid on CPU.
Appendix Appendix Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus complies with Canadian ICES-003, RSS-210, and CAN ICES3(B)/NMB-3(B). This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
Australia statement notice From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://www. asus.com/support/. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Add-on Card Model Number : HYPER M.2 X16 CARD Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.