Specifications
ASUS M3A32-MVP Deluxe Series 2-31
4. Marvell
®
6121 Serial ATA RAID connector (7-pin SATA_RAID1/2)
This connector is for a Serial ATA signal cable that supports a Serial ATA hard
disk drive. To congure RAID 0 or RAID 1, install two internal Serial ATA hard
disk drives to the SATA_RAID1/2 connectors.
The Marvell IDE/RAID function item in BIOS is set to [IDE] by default. Setting
this item to [RAID] allows you to use the connectors to build a RAID set. See
section 4.4.5 Onboard Devices Conguration for details.
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the Marvell RAID BIOS Conguration utility
and SATA BIOS setup during POST.
M3A32-MVP DELUXE
®
M3A32-MVP DELUXE
SATA RAID connectors
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA_RAID1 SATA_RAID2