User’s Manual
Table Of Contents
- もくじ
- Chapter 1: 製品の概要
- Chapter 2: ハードウェア
- Chapter 3: BIOS Setup
- 3.1 BIOSとは
- 3.2 BIOSを更新する
- 3.3 BIOS Setup プログラム
- 3.4 メインメニュー
- 3.5 Ai Tweaker メニュー
- 3.5.1 CPU Level UP [Auto]
- 3.5.2 CPU OverClocking [Auto]
- 3.5.3 CPU Ratio [Auto]
- 3.5.4 DRAM Frequency [Auto]
- 3.5.5 CPU/NB Frequency [Auto]
- 3.5.6 HT Link Speed [Auto]
- 3.5.7 GPU OverClocking [Auto]
- 3.5.8 OC Tuner Utility
- 3.5.9 DRAM Timing Configuration
- 3.5.10 DRAM Driving Configuration
- 3.5.11 CPU & NB Voltage Mode [Offset]
- 3.5.12 CPU VDDA Voltage [Auto]
- 3.5.13 DRAM Voltage [Auto]
- 3.5.14 HT Voltage [Auto]
- 3.5.15 NB 1.2V Voltage [Auto]
- 3.5.16 NB 1.1V Voltage [Auto]
- 3.5.17 NB 1.8V Voltage [Auto]
- 3.5.18 SB Voltage [Auto]
- 3.5.19 SidePort Memory Voltage [Auto]
- 3.5.20 CPU Load-Line Calibration [Auto]
- 3.5.21 CPU/NB Load-Line Calibration [Auto]
- 3.5.22 PCI/PCIe CLK Status [Enabled]
- 3.6 拡張メニュー
- 3.7 電源メニュー
- 3.8 ブートメニュー
- 3.9 ツールメニュー
- 3.10 終了メニュー
- Chapter 4: ソフトウェア
- Chapter 5: ATI® CrossFireX™テクノロジ
4-16
Chapter 4
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[↑] Up [↓] Down [PaUp/PaDn] Switch page [Space] Change Option
[Ctrl-Y] Save [ESC] Exit
[ Keys Available ]
[ LD Dene Menu ]
[ Drives Assignments ]
Port:ID Drive Model Capabilities Capacity(GB) Assignment
01:00 xxxxxxxxx xxxxxxx xxxxxx Y
02:00 xxxxxxxxx xxxxxxx xxxxxx Y
03:00 xxxxxxxxx xxxxxxx xxxxxx N
04:00 xxxxxxxxx xxxxxxx xxxxxx N
LD No LD Name RAID Mode Drv
LD 1 Logical Drive 1 RAID 0 2
Strip Block 64 KB Fast Init ON
Gigabyte Boundary ON Cache Mode WriteThru
Please press Ctrl-Y key to input the LD Name
or press any key to exit.
If you do not input any LD name, the default LD
name will be used.
Enter the LD name here:
Fast Initialization Option has been selected
It will erase the MBR data of the disks.
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>