User’s Manual
Table Of Contents
- もくじ
- Chapter 1: 製品の概要
- Chapter 2: ハードウェア
- Chapter 3: BIOS Setup
- 3.1 BIOSとは
- 3.2 BIOSを更新する
- 3.3 BIOS Setup プログラム
- 3.4 メインメニュー
- 3.5 Ai Tweaker メニュー
- 3.5.1 CPU Level UP [Auto]
- 3.5.2 CPU OverClocking [Auto]
- 3.5.3 CPU Ratio [Auto]
- 3.5.4 DRAM Frequency [Auto]
- 3.5.5 CPU/NB Frequency [Auto]
- 3.5.6 HT Link Speed [Auto]
- 3.5.7 GPU OverClocking [Auto]
- 3.5.8 OC Tuner Utility
- 3.5.9 DRAM Timing Configuration
- 3.5.10 DRAM Driving Configuration
- 3.5.11 CPU & NB Voltage Mode [Offset]
- 3.5.12 CPU VDDA Voltage [Auto]
- 3.5.13 DRAM Voltage [Auto]
- 3.5.14 HT Voltage [Auto]
- 3.5.15 NB 1.2V Voltage [Auto]
- 3.5.16 NB 1.1V Voltage [Auto]
- 3.5.17 NB 1.8V Voltage [Auto]
- 3.5.18 SB Voltage [Auto]
- 3.5.19 SidePort Memory Voltage [Auto]
- 3.5.20 CPU Load-Line Calibration [Auto]
- 3.5.21 CPU/NB Load-Line Calibration [Auto]
- 3.5.22 PCI/PCIe CLK Status [Enabled]
- 3.6 拡張メニュー
- 3.7 電源メニュー
- 3.8 ブートメニュー
- 3.9 ツールメニュー
- 3.10 終了メニュー
- Chapter 4: ソフトウェア
- Chapter 5: ATI® CrossFireX™テクノロジ
3-36
Chapter 3
Security Settings
Supervisor Password : Installed
User Password : Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Clear User Password
Password Check [Setup]
BIOS SETUP UTILITY
Boot
<Enter> to change
password.
<Enter> again to
disabled password.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Passward
BIOS SETUP UTILITY
Boot
<Enter> to change
password.
<Enter> again to
disable password.